Hi,
since a few weeks the /dev/dri/card0 entry sometimes vanishes when I exit Xorg. When I want to start Xorg again I get the following error message:
... [ 12711.547] (II) [KMS] Kernel modesetting enabled. [ 12711.548] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 12711.548] (II) RADEON(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 12711.548] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32 [ 12711.548] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 12711.548] (==) RADEON(0): Default visual is TrueColor [ 12711.548] (==) RADEON(0): RGB weight 888 [ 12711.548] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) [ 12711.548] (--) RADEON(0): Chipset: "ATI Radeon HD 3300 Graphics" (ChipID = 0x9614) [ 12711.548] (II) RADEON(0): PCI card detected [ 12711.940] (EE) RADEON(0): [drm] Failed to open DRM device for pci:0000:01:05.0: No such file or directory [ 12711.940] (EE) RADEON(0): Kernel modesetting setup failed [ 12711.940] (II) UnloadModule: "radeon" [ 12711.940] (EE) Screen(s) found, but none have a usable configuration. [ 12711.940] Fatal server error: [ 12711.940] no screens found
I have to manually run "mdev -s" to restore the /dev/dri/card0 device.
This happens with an Radeon RS780 and Xorg version 1.13.0 running the latest git kernel.
/sys/class/drm/card0/device/power_profile is set to "auto"
Is this a known problem? Are there any workarounds?
On 2012.09.29 at 20:38 +0200, Markus Trippelsdorf wrote:
since a few weeks the /dev/dri/card0 entry sometimes vanishes when I exit Xorg. When I want to start Xorg again I get the following error message:
... [ 12711.547] (II) [KMS] Kernel modesetting enabled. [ 12711.548] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 12711.548] (II) RADEON(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 12711.548] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32 [ 12711.548] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps) [ 12711.548] (==) RADEON(0): Default visual is TrueColor [ 12711.548] (==) RADEON(0): RGB weight 888 [ 12711.548] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC) [ 12711.548] (--) RADEON(0): Chipset: "ATI Radeon HD 3300 Graphics" (ChipID = 0x9614) [ 12711.548] (II) RADEON(0): PCI card detected [ 12711.940] (EE) RADEON(0): [drm] Failed to open DRM device for pci:0000:01:05.0: No such file or directory [ 12711.940] (EE) RADEON(0): Kernel modesetting setup failed [ 12711.940] (II) UnloadModule: "radeon" [ 12711.940] (EE) Screen(s) found, but none have a usable configuration. [ 12711.940] Fatal server error: [ 12711.940] no screens found
I have to manually run "mdev -s" to restore the /dev/dri/card0 device.
It turned out that this is apparently caused by local voltage spikes of my power line. From time to time I see this message in dmseg:
hub 4-0:1.0: port 3 disabled by hub (EMI?), re-enabling... usb 4-3: USB disconnect, device number 2 usb 4-3: new full-speed USB device number 3 using ohci_hcd
It it exactly at this point that /dev/dri/card0 vanishes. Guess I will buy an UPS in the next days...
dri-devel@lists.freedesktop.org
-
Markus Trippelsdorf