I used this branch qcom/arm64-for-5.6-to-be-rebased as suggested by Matthias. This patch needs the clock patches and the clock patches have not yet landed, so please apply the following series and patches in order
a) All patches from https://patchwork.kernel.org/project/linux-clk/list/?series=203517&state... b) Patches 1 and 2 from https://patchwork.kernel.org/project/linux-clk/list/?series=203527&archi... c) All patches from https://patchwork.kernel.org/project/linux-clk/list/?series=221739&archi... d) https://lore.kernel.org/linux-arm-msm/20200124144154.v2.10.I1a4b93fb005791e2... e) This patch "arm64: dts: qcom: sc7180: Add A618 gpu dt blob"
v3: Addressed review comments from previous submits. Also removed the interconnect bindings from this patch and I will submit as a new patch with its dependencies listed. Also I will be sending a new patch for updating the bindings documentation.
v4: Add GX_GDSC power domain binding for GMU
v5: Change to a dummy GX_GDSC binding for faster landing
Sharat Masetty (1): arm64: dts: qcom: sc7180: Add A618 gpu dt blob
arch/arm64/boot/dts/qcom/sc7180.dtsi | 102 +++++++++++++++++++++++++++++++++++ 1 file changed, 102 insertions(+)
-- 1.9.1
This patch adds the required dt nodes and properties to enabled A618 GPU.
Signed-off-by: Sharat Masetty smasetty@codeaurora.org --- arch/arm64/boot/dts/qcom/sc7180.dtsi | 102 +++++++++++++++++++++++++++++++++++ 1 file changed, 102 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index f3fcc5c..5cdcbce 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -1043,6 +1043,108 @@ }; };
+ gpu: gpu@5000000 { + compatible = "qcom,adreno-618.0", "qcom,adreno"; + #stream-id-cells = <16>; + reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>, + <0 0x05061000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc"; + interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&adreno_smmu 0>; + operating-points-v2 = <&gpu_opp_table>; + qcom,gmu = <&gmu>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-level = <RPMH_REGULATOR_LEVEL_TURBO>; + }; + + opp-650000000 { + opp-hz = /bits/ 64 <650000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>; + }; + + opp-565000000 { + opp-hz = /bits/ 64 <565000000>; + opp-level = <RPMH_REGULATOR_LEVEL_NOM>; + }; + + opp-430000000 { + opp-hz = /bits/ 64 <430000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>; + }; + + opp-355000000 { + opp-hz = /bits/ 64 <355000000>; + opp-level = <RPMH_REGULATOR_LEVEL_SVS>; + }; + + opp-267000000 { + opp-hz = /bits/ 64 <267000000>; + opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>; + }; + + opp-180000000 { + opp-hz = /bits/ 64 <180000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + + adreno_smmu: iommu@5040000 { + compatible = "qcom,sc7180-smmu-v2", "qcom,smmu-v2"; + reg = <0 0x05040000 0 0x10000>; + #iommu-cells = <1>; + #global-interrupts = <2>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 364 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 365 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 366 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 367 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 368 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 369 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 370 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 371 IRQ_TYPE_EDGE_RISING>; + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>; + + clock-names = "bus", "iface", "mem_iface_clk"; + power-domains = <&gpucc CX_GDSC>; + }; + + gmu: gmu@506a000 { + compatible="qcom,adreno-gmu-618.0", "qcom,adreno-gmu"; + reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>, + <0 0x0b490000 0 0x10000>; + reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq"; + interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc GPU_CC_CX_GMU_CLK>, + <&gpucc GPU_CC_CXO_CLK>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>; + clock-names = "gmu", "cxo", "axi", "memnoc"; + power-domains = <&gpucc CX_GDSC>, <0>; + power-domain-names = "cx", "gx"; + iommus = <&adreno_smmu 5>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>; + }; + }; + }; + gpucc: clock-controller@5090000 { compatible = "qcom,sc7180-gpucc"; reg = <0 0x05090000 0 0x9000>;
dri-devel@lists.freedesktop.org
-
Sharat Masetty