Hi Marek,

Thank you for the patch.

On Fri, Apr 01, 2022 at 06:21:53PM +0200, Marek Vasut wrote:

The mode parsing is currently implemented in three steps: of_get_display_timing() - DT panel-timing to struct display_timing videomode_from_timing() - struct display_timing to struct videomode drm_display_mode_from_videomode() - struct videomode to struct drm_display_mode

Replace all that with simple of_get_drm_panel_display_mode() call, which already populates struct drm_display_mode and then duplicate that mode in panel_lvds_get_modes() each time, since the mode does not change.

Nice bonus is the bus_flags parsed by of_get_drm_panel_display_mode() out of panel-timing DT node, which is used in subsequent patch to fix handling of 'de-active' DT property.

Tested-by: Christoph Niedermaier cniedermaier@dh-electronics.com Signed-off-by: Marek Vasut marex@denx.de Cc: Christoph Niedermaier cniedermaier@dh-electronics.com Cc: Daniel Vetter daniel.vetter@ffwll.ch Cc: Dmitry Osipenko digetx@gmail.com Cc: Laurent Pinchart laurent.pinchart@ideasonboard.com Cc: Robert Foss robert.foss@linaro.org Cc: Sam Ravnborg sam@ravnborg.org Cc: Thomas Zimmermann tzimmermann@suse.de To: dri-devel@lists.freedesktop.org

Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com

---

V2: - Reinstate mandatory width-mm/height-mm DT property check - Collect TB from Christoph

---

drivers/gpu/drm/panel/panel-lvds.c | 22 +++++++++------------- 1 file changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-lvds.c b/drivers/gpu/drm/panel/panel-lvds.c index 27a1c9923b09..6422868c1089 100644 --- a/drivers/gpu/drm/panel/panel-lvds.c +++ b/drivers/gpu/drm/panel/panel-lvds.c @@ -30,7 +30,8 @@ struct panel_lvds { const char *label; unsigned int width; unsigned int height;

• struct videomode video_mode;

• struct drm_display_mode dmode;
• u32 bus_flags; unsigned int bus_format; bool data_mirror;

@@ -87,16 +88,15 @@ static int panel_lvds_get_modes(struct drm_panel *panel, struct panel_lvds *lvds = to_panel_lvds(panel); struct drm_display_mode *mode;

• mode = drm_mode_create(connector->dev);

• mode = drm_mode_duplicate(connector->dev, &lvds->dmode); if (!mode) return 0;

• drm_display_mode_from_videomode(&lvds->video_mode, mode); mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; drm_mode_probed_add(connector, mode);

• connector->display_info.width_mm = lvds->width;

• connector->display_info.height_mm = lvds->height;

• connector->display_info.width_mm = lvds->dmode.width_mm;
• connector->display_info.height_mm = lvds->dmode.height_mm; drm_display_info_set_bus_formats(&connector->display_info, &lvds->bus_format, 1); connector->display_info.bus_flags = lvds->data_mirror

@@ -116,7 +116,6 @@ static const struct drm_panel_funcs panel_lvds_funcs = { static int panel_lvds_parse_dt(struct panel_lvds *lvds) { struct device_node *np = lvds->dev->of_node;

• struct display_timing timing; int ret;

  ret = of_drm_get_panel_orientation(np, &lvds->orientation);

@@ -125,23 +124,20 @@ static int panel_lvds_parse_dt(struct panel_lvds *lvds) return ret; }

• ret = of_get_display_timing(np, "panel-timing", &timing);

• ret = of_get_drm_panel_display_mode(np, &lvds->dmode, &lvds->bus_flags); if (ret < 0) { dev_err(lvds->dev, "%pOF: problems parsing panel-timing (%d)\n", np, ret); return ret; }

• videomode_from_timing(&timing, &lvds->video_mode);
• ret = of_property_read_u32(np, "width-mm", &lvds->width);
• if (ret < 0) {

• if (lvds->dmode.width_mm == 0) { dev_err(lvds->dev, "%pOF: invalid or missing %s DT property\n", np, "width-mm"); return -ENODEV; }

• ret = of_property_read_u32(np, "height-mm", &lvds->height);
• if (ret < 0) {

• if (lvds->dmode.height_mm == 0) { dev_err(lvds->dev, "%pOF: invalid or missing %s DT property\n", np, "height-mm"); return -ENODEV;