This DSI driver uses the new descriptor API so these old GPIO API includes are surplus.

Cc: Rob Clark robdclark@gmail.com Cc: Sean Paul sean@poorly.run Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Linus Walleij linus.walleij@linaro.org --- drivers/gpu/drm/msm/dsi/dsi_host.c | 2 -- 1 file changed, 2 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 610183db1daf..d44bad13cbaf 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -14,11 +14,9 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/err.h> -#include <linux/gpio.h> #include <linux/gpio/consumer.h> #include <linux/interrupt.h> #include <linux/of_device.h> -#include <linux/of_gpio.h> #include <linux/of_irq.h> #include <linux/pinctrl/consumer.h> #include <linux/of_graph.h>

Insteaf of the MSM DRM code going around and inspecting the device tree nodes by itself to find "qcom,misc" GPIO phandles, we add a quirk to the core so that if "qcom,misc-gpios" and "qcom,misc-gpio" isn't found, we try to find just "qcom,misc" as a last resort. Provide an explicit whitelist for those GPIOs.

Cc: Rob Clark robdclark@gmail.com Cc: Sean Paul sean@poorly.run Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Linus Walleij linus.walleij@linaro.org --- Rob/Sean: if the approach is overall OK I will merge this one patch already for v5.3 so the rest can be queued for v5.4 later. --- drivers/gpio/gpiolib-of.c | 43 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index aec7bd86ae7e..c927eaf6c88f 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -286,6 +286,45 @@ static struct gpio_desc *of_find_regulator_gpio(struct device *dev, const char * return desc; }

+/* + * Some non-standard Qualcomm HDMI GPIOs need to be supported as they exist + * in random old device trees out there. + */ +static struct gpio_desc *of_find_hdmi_gpio(struct device *dev, + const char *con_id, + enum of_gpio_flags *of_flags) +{ + /* + * These are the connection IDs we accept as legacy GPIO phandles. + * If we get here, the same prefix ending with "-gpio" and "-gpios" + * has already been tried so now we finally try with no suffix. + */ + const char *whitelist[] = { + "qcom,hdmi-tx-ddc-clk", + "qcom,hdmi-tx-ddc-data", + "qcom,hdmi-tx-hpd", + "qcom,hdmi-tx-mux-en", + "qcom,hdmi-tx-mux-sel", + "qcom,hdmi-tx-mux-lpm", + }; + struct device_node *np = dev->of_node; + struct gpio_desc *desc; + int i; + + if (!IS_ENABLED(CONFIG_DRM_MSM)) + return ERR_PTR(-ENOENT); + + if (!con_id) + return ERR_PTR(-ENOENT); + + i = match_string(whitelist, ARRAY_SIZE(whitelist), con_id); + if (i < 0) + return ERR_PTR(-ENOENT); + + desc = of_get_named_gpiod_flags(np, con_id, 0, of_flags); + return desc; +} + struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id, unsigned int idx, unsigned long *flags) { @@ -330,6 +369,10 @@ struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id, if (IS_ERR(desc) && PTR_ERR(desc) != -EPROBE_DEFER) desc = of_find_regulator_gpio(dev, con_id, &of_flags);

+ /* Special handling for HDMI GPIOs if used */ + if (IS_ERR(desc) && PTR_ERR(desc) != -EPROBE_DEFER) + desc = of_find_hdmi_gpio(dev, con_id, &of_flags); + if (IS_ERR(desc)) return desc;

This switches the MSM HDMI code to use GPIO descriptors. Normally we would fetch the GPIOs from the device with the flags GPIOD_IN or GPIOD_OUT_[LOW|HIGH] to set up the lines immediately, but since the code seems eager to actively drive the lines high/low when turning HDMI on and off, we just fetch the GPIOs as-is and keep the code explicitly driving them.

The old code would try legacy bindings (GPIOs without any "-gpios" suffix) but this has been moved to the gpiolib as a quirk by the previous patch.

Cc: Rob Clark robdclark@gmail.com Cc: Sean Paul sean@poorly.run Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Linus Walleij linus.walleij@linaro.org --- drivers/gpu/drm/msm/hdmi/hdmi.c | 66 +++++++++++------------ drivers/gpu/drm/msm/hdmi/hdmi.h | 4 +- drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 42 +++++---------- 3 files changed, 45 insertions(+), 67 deletions(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.c b/drivers/gpu/drm/msm/hdmi/hdmi.c index e247d6942a49..c8e8268c76e2 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi.c @@ -436,38 +436,6 @@ static const struct { { "qcom,hdmi-tx-mux-lpm", true, 1, "HDMI_MUX_LPM" }, };

-static int msm_hdmi_get_gpio(struct device_node *of_node, const char *name) -{ - int gpio; - - /* try with the gpio names as in the table (downstream bindings) */ - gpio = of_get_named_gpio(of_node, name, 0); - if (gpio < 0) { - char name2[32]; - - /* try with the gpio names as in the upstream bindings */ - snprintf(name2, sizeof(name2), "%s-gpios", name); - gpio = of_get_named_gpio(of_node, name2, 0); - if (gpio < 0) { - char name3[32]; - - /* - * try again after stripping out the "qcom,hdmi-tx" - * prefix. This is mainly to match "hpd-gpios" used - * in the upstream bindings - */ - if (sscanf(name2, "qcom,hdmi-tx-%s", name3)) - gpio = of_get_named_gpio(of_node, name3, 0); - } - - if (gpio < 0) { - DBG("failed to get gpio: %s (%d)", name, gpio); - gpio = -1; - } - } - return gpio; -} - /* * HDMI audio codec callbacks */ @@ -593,11 +561,39 @@ static int msm_hdmi_bind(struct device *dev, struct device *master, void *data) hdmi_cfg->qfprom_mmio_name = "qfprom_physical";

for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) { - hdmi_cfg->gpios[i].num = msm_hdmi_get_gpio(of_node, - msm_hdmi_gpio_pdata[i].name); + const char *name = msm_hdmi_gpio_pdata[i].name; + struct gpio_desc *gpiod; + + /* + * We are fetching the GPIO lines "as is" since the connector + * code is enabling and disabling the lines. Until that point + * the power-on default value will be kept. + */ + gpiod = devm_gpiod_get_optional(dev, name, GPIOD_ASIS); + /* This will catch e.g. -PROBE_DEFER */ + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); + if (!gpiod) { + /* Try a second time, stripping down the name */ + char name3[32]; + + /* + * Try again after stripping out the "qcom,hdmi-tx" + * prefix. This is mainly to match "hpd-gpios" used + * in the upstream bindings. + */ + if (sscanf(name, "qcom,hdmi-tx-%s", name3)) + gpiod = devm_gpiod_get_optional(dev, name3, GPIOD_ASIS); + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); + if (!gpiod) + DBG("failed to get gpio: %s", name); + } + hdmi_cfg->gpios[i].gpiod = gpiod; + if (gpiod) + gpiod_set_consumer_name(gpiod, msm_hdmi_gpio_pdata[i].label); hdmi_cfg->gpios[i].output = msm_hdmi_gpio_pdata[i].output; hdmi_cfg->gpios[i].value = msm_hdmi_gpio_pdata[i].value; - hdmi_cfg->gpios[i].label = msm_hdmi_gpio_pdata[i].label; }

dev->platform_data = hdmi_cfg; diff --git a/drivers/gpu/drm/msm/hdmi/hdmi.h b/drivers/gpu/drm/msm/hdmi/hdmi.h index 5c5df6ab2a57..3ef956e8de71 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi.h +++ b/drivers/gpu/drm/msm/hdmi/hdmi.h @@ -22,6 +22,7 @@ #include <linux/clk.h> #include <linux/platform_device.h> #include <linux/regulator/consumer.h> +#include <linux/gpio/consumer.h> #include <linux/hdmi.h>

#include "msm_drv.h" @@ -33,10 +34,9 @@ struct hdmi_phy; struct hdmi_platform_config;

struct hdmi_gpio_data { - int num; + struct gpio_desc *gpiod; bool output; int value; - const char *label; };

struct hdmi_audio { diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c index a6eeab2c4dc3..c4e9f6d7960f 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c @@ -15,7 +15,7 @@ * this program. If not, see http://www.gnu.org/licenses/. */

-#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/pinctrl/consumer.h>

#include "msm_kms.h" @@ -79,30 +79,21 @@ static void msm_hdmi_phy_reset(struct hdmi *hdmi)

static int gpio_config(struct hdmi *hdmi, bool on) { - struct device *dev = &hdmi->pdev->dev; const struct hdmi_platform_config *config = hdmi->config; - int ret, i; + int i;

if (on) { for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) { struct hdmi_gpio_data gpio = config->gpios[i];

- if (gpio.num != -1) { - ret = gpio_request(gpio.num, gpio.label); - if (ret) { - DRM_DEV_ERROR(dev, - "'%s'(%d) gpio_request failed: %d\n", - gpio.label, gpio.num, ret); - goto err; - } - + if (gpio.gpiod) { if (gpio.output) { - gpio_direction_output(gpio.num, - gpio.value); + gpiod_direction_output(gpio.gpiod, + gpio.value); } else { - gpio_direction_input(gpio.num); - gpio_set_value_cansleep(gpio.num, - gpio.value); + gpiod_direction_input(gpio.gpiod); + gpiod_set_value_cansleep(gpio.gpiod, + gpio.value); } } } @@ -112,29 +103,20 @@ static int gpio_config(struct hdmi *hdmi, bool on) for (i = 0; i < HDMI_MAX_NUM_GPIO; i++) { struct hdmi_gpio_data gpio = config->gpios[i];

- if (gpio.num == -1) + if (!gpio.gpiod) continue;

if (gpio.output) { int value = gpio.value ? 0 : 1;

- gpio_set_value_cansleep(gpio.num, value); + gpiod_set_value_cansleep(gpio.gpiod, value); } - - gpio_free(gpio.num); };

DBG("gpio off"); }

return 0; -err: - while (i--) { - if (config->gpios[i].num != -1) - gpio_free(config->gpios[i].num); - } - - return ret; }

static void enable_hpd_clocks(struct hdmi *hdmi, bool enable) @@ -322,7 +304,7 @@ static enum drm_connector_status detect_gpio(struct hdmi *hdmi) const struct hdmi_platform_config *config = hdmi->config; struct hdmi_gpio_data hpd_gpio = config->gpios[HPD_GPIO_INDEX];

- return gpio_get_value(hpd_gpio.num) ? + return gpiod_get_value(hpd_gpio.gpiod) ? connector_status_connected : connector_status_disconnected; } @@ -341,7 +323,7 @@ static enum drm_connector_status hdmi_connector_detect( * some platforms may not have hpd gpio. Rely only on the status * provided by REG_HDMI_HPD_INT_STATUS in this case. */ - if (hpd_gpio.num == -1) + if (!hpd_gpio.gpiod) return detect_reg(hdmi);

do {

After untangling the MSM HDMI GPIO code we see that the code is deliberately setting the output value of the HPD (hot plug detect) line to high, even though it is being used as input which is of course the only viable use of a HPD pin.

This seems dubious: GPIO lines set up as input will have high impedance (tristate) and the typical electronic construction involves this line being used with a pull-down resistor around 10KOhm to keep it low (this is sometimes part of a levelshifter component) and then an inserted connector will pull it up to VDD and this asserts the HPD signal, as can be seen from the code reading the HPD GPIO.

Stop try driving a value to the HPD input GPIO.

Cc: Rob Clark robdclark@gmail.com Cc: Sean Paul sean@poorly.run Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Signed-off-by: Linus Walleij linus.walleij@linaro.org --- drivers/gpu/drm/msm/hdmi/hdmi_connector.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c index 89c64cc85027..ecbcd8638b66 100644 --- a/drivers/gpu/drm/msm/hdmi/hdmi_connector.c +++ b/drivers/gpu/drm/msm/hdmi/hdmi_connector.c @@ -87,7 +87,7 @@ static int gpio_config(struct hdmi *hdmi, bool on) struct hdmi_gpio_data gpio = config->gpios[i];

/* The value indicates the value for turning things on */ - if (gpio.gpiod) + if (gpio.gpiod && gpio.output) gpiod_set_value_cansleep(gpio.gpiod, gpio.value); }