While 'ddc-i2c-bus' is a common property, it should be in a connector node rather than the HDMI bridge node as the I2C bus goes to a connector and not the HDMI block. Drop it from the example.
Signed-off-by: Rob Herring robh@kernel.org --- .../devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml | 1 - 1 file changed, 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml index b8219eab4475..89490fdffeb0 100644 --- a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml @@ -55,7 +55,6 @@ examples: compatible = "ingenic,jz4780-dw-hdmi"; reg = <0x10180000 0x8000>; reg-io-width = <4>; - ddc-i2c-bus = <&i2c4>; interrupt-parent = <&intc>; interrupts = <3>; clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
Hi Rob,
Thank you for the patch.
On Wed, May 25, 2022 at 03:56:26PM -0500, Rob Herring wrote:
While 'ddc-i2c-bus' is a common property, it should be in a connector node rather than the HDMI bridge node as the I2C bus goes to a connector and not the HDMI block. Drop it from the example.
Signed-off-by: Rob Herring robh@kernel.org
Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com
.../devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml | 1 - 1 file changed, 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml index b8219eab4475..89490fdffeb0 100644 --- a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml @@ -55,7 +55,6 @@ examples: compatible = "ingenic,jz4780-dw-hdmi"; reg = <0x10180000 0x8000>; reg-io-width = <4>;
ddc-i2c-bus = <&i2c4>; interrupt-parent = <&intc>; interrupts = <3>; clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;
On Thu, 26 May 2022 at 00:34, Laurent Pinchart laurent.pinchart@ideasonboard.com wrote:
Hi Rob,
Thank you for the patch.
On Wed, May 25, 2022 at 03:56:26PM -0500, Rob Herring wrote:
While 'ddc-i2c-bus' is a common property, it should be in a connector node rather than the HDMI bridge node as the I2C bus goes to a connector and not the HDMI block. Drop it from the example.
Signed-off-by: Rob Herring robh@kernel.org
Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com
.../devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml | 1 - 1 file changed, 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml index b8219eab4475..89490fdffeb0 100644 --- a/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ingenic,jz4780-hdmi.yaml @@ -55,7 +55,6 @@ examples: compatible = "ingenic,jz4780-dw-hdmi"; reg = <0x10180000 0x8000>; reg-io-width = <4>;
ddc-i2c-bus = <&i2c4>; interrupt-parent = <&intc>; interrupts = <3>; clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;-- Regards,
Laurent Pinchart
Applied to drm-misc-next
dri-devel@lists.freedesktop.org
-
Laurent Pinchart -
Rob Herring -
Robert Foss