dri-devel July 2013

dri-devel@lists.freedesktop.org

142 participants
850 discussions

[PATCH] drm/prime: remove cargo-cult locking from map_sg helper
by Daniel Vetter 11 Jul '13

11 Jul '13

I've checked both implementations (radeon/nouveau) and they both grab the page array from ttm simply by dereferencing it and then wrapping it up with drm_prime_pages_to_sg in the callback and map it with dma_map_sg (in the helper). Only the grabbing of the underlying page array is anything we need to be concerned about, and either those pages are pinned independently, or we're screwed no matter what. And indeed, nouveau/radeon pin the backing storage in their attach/detach functions. The only thing we might claim it does is prevent concurrent mapping of dma_buf attachments. But a) that's not allowed and b) the current code is racy already since it checks whether the sg mapping exists _before_ grabbing the lock. So the dev->struct_mutex locking here does absolutely nothing useful, but only distracts. Remove it. This should also help Maarten's work to eventually pin the backing storage more dynamically by preventing locking inversions around dev->struct_mutex. Cc: Maarten Lankhorst <maarten.lankhorst(a)canonical.com> Signed-off-by: Daniel Vetter <daniel.vetter(a)ffwll.ch> --- drivers/gpu/drm/drm_prime.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index 85e450e..64a99b3 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -167,8 +167,6 @@ static struct sg_table *drm_gem_map_dma_buf(struct dma_buf_attachment *attach, if (WARN_ON(prime_attach->dir != DMA_NONE)) return ERR_PTR(-EBUSY); - mutex_lock(&obj->dev->struct_mutex); - sgt = obj->dev->driver->gem_prime_get_sg_table(obj); if (!IS_ERR(sgt)) { @@ -182,7 +180,6 @@ static struct sg_table *drm_gem_map_dma_buf(struct dma_buf_attachment *attach, } } - mutex_unlock(&obj->dev->struct_mutex); return sgt; } -- 1.8.3.2

4 9

Radeon HD 6310 (AMD Wrestler): [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!!
by Paul Menzel 11 Jul '13

11 Jul '13

Dear Linux folks, using a Linux 3.10 with the drm-next-3.11 tree from Alex Deuscher merged and built with `make deb-pkg`, it failed the last boot. [drm:evergreen_startup] *ERROR* radeon: error initializing UVD (-1). The strange thing is that it worked the last time I tried with the same Linux kernel image as I posted to the list [1]. I just booted an old 3.2.46 distribution Linux in between. (And it looked like the modesetting did not work when doing so. But I did not look further into it.) $ uname -a Linux myhostname 3.10.0+ #105 SMP Sat Jul 6 13:33:47 CEST 2013 i686 GNU/Linux $ lspci -s 01.0 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6310] $ md5sum /lib/firmware/3.10.0+/radeon/SUMO_uvd.bin 51d9e0e2247c313c5bfc8fa7bb5b213d /lib/firmware/3.10.0+/radeon/SUMO_uvd.bin $ cut -d " " -f 6- /var/log/kern.log […] [ 0.152534] calling trace_init_flags_sys_exit+0x0/0xd @ 1 [ 0.152540] initcall trace_init_flags_sys_exit+0x0/0xd returned 0 after 0 usecs [ 0.152545] calling trace_init_flags_sys_enter+0x0/0xd @ 1 [ 0.152550] initcall trace_init_flags_sys_enter+0x0/0xd returned 0 after 0 usecs [ 0.152555] calling init_hw_perf_events+0x0/0x47e @ 1 [ 0.152557] Performance Events: AMD PMU driver. [ 0.152565] ... version: 0 [ 0.152567] ... bit width: 48 [ 0.152569] ... generic registers: 4 [ 0.152572] ... value mask: 0000ffffffffffff [ 0.152575] ... max period: 00007fffffffffff [ 0.152577] ... fixed-purpose events: 0 [ 0.152580] ... event mask: 000000000000000f [ 0.152597] initcall init_hw_perf_events+0x0/0x47e returned 0 after 0 usecs [ 0.152603] calling register_trigger_all_cpu_backtrace+0x0/0xf @ 1 [ 0.152609] initcall register_trigger_all_cpu_backtrace+0x0/0xf returned 0 after 0 usecs [ 0.152615] calling spawn_ksoftirqd+0x0/0x1d @ 1 [ 0.152657] initcall spawn_ksoftirqd+0x0/0x1d returned 0 after 0 usecs [ 0.152662] calling init_workqueues+0x0/0x289 @ 1 [ 0.152800] initcall init_workqueues+0x0/0x289 returned 0 after 0 usecs [ 0.152805] calling check_cpu_stall_init+0x0/0x12 @ 1 [ 0.152810] initcall check_cpu_stall_init+0x0/0x12 returned 0 after 0 usecs [ 0.152814] calling migration_init+0x0/0x55 @ 1 [ 0.152820] initcall migration_init+0x0/0x55 returned 0 after 0 usecs [ 0.152826] calling cpu_stop_init+0x0/0x57 @ 1 [ 0.152863] initcall cpu_stop_init+0x0/0x57 returned 0 after 0 usecs [ 0.152868] calling rcu_register_oom_notifier+0x0/0xd @ 1 [ 0.152874] initcall rcu_register_oom_notifier+0x0/0xd returned 0 after 0 usecs [ 0.152879] calling rcu_scheduler_really_started+0x0/0xd @ 1 [ 0.152883] initcall rcu_scheduler_really_started+0x0/0xd returned 0 after 0 usecs [ 0.152888] calling rcu_spawn_gp_kthread+0x0/0x6b @ 1 [ 0.152936] initcall rcu_spawn_gp_kthread+0x0/0x6b returned 0 after 0 usecs [ 0.152941] calling relay_init+0x0/0xd @ 1 [ 0.152946] initcall relay_init+0x0/0xd returned 0 after 0 usecs [ 0.152950] calling tracer_alloc_buffers+0x0/0x18b @ 1 [ 0.153030] initcall tracer_alloc_buffers+0x0/0x18b returned 0 after 0 usecs [ 0.153034] calling init_events+0x0/0x57 @ 1 [ 0.153041] initcall init_events+0x0/0x57 returned 0 after 0 usecs [ 0.153046] calling init_trace_printk+0x0/0xa @ 1 [ 0.153051] initcall init_trace_printk+0x0/0xa returned 0 after 0 usecs [ 0.153055] calling event_trace_memsetup+0x0/0x4a @ 1 [ 0.153067] initcall event_trace_memsetup+0x0/0x4a returned 0 after 0 usecs [ 0.153158] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.153361] CPU 1 irqstacks, hard=f40ae000 soft=f40b0000 [ 0.153365] smpboot: Booting Node 0, Processors #1 OK [ 0.163398] Initializing CPU#1 [ 0.166591] Brought up 2 CPUs [ 0.166596] smpboot: Total of 2 processors activated (6399.62 BogoMIPS) [ 0.168897] devtmpfs: initialized [ 0.169277] calling ipc_ns_init+0x0/0xd @ 1 [ 0.169284] initcall ipc_ns_init+0x0/0xd returned 0 after 0 usecs [ 0.169289] calling init_mmap_min_addr+0x0/0xd @ 1 [ 0.169294] initcall init_mmap_min_addr+0x0/0xd returned 0 after 0 usecs [ 0.169302] calling init_cpufreq_transition_notifier_list+0x0/0x14 @ 1 [ 0.169315] initcall init_cpufreq_transition_notifier_list+0x0/0x14 returned 0 after 0 usecs [ 0.169320] calling net_ns_init+0x0/0xca @ 1 [ 0.169556] initcall net_ns_init+0x0/0xca returned 0 after 0 usecs [ 0.169661] calling e820_mark_nvs_memory+0x0/0x3c @ 1 [ 0.169668] initcall e820_mark_nvs_memory+0x0/0x3c returned 0 after 0 usecs [ 0.169673] calling cpufreq_tsc+0x0/0x22 @ 1 [ 0.169679] initcall cpufreq_tsc+0x0/0x22 returned 0 after 0 usecs [ 0.169684] calling reboot_init+0x0/0x16 @ 1 [ 0.169698] initcall reboot_init+0x0/0x16 returned 0 after 0 usecs [ 0.169703] calling init_lapic_sysfs+0x0/0x17 @ 1 [ 0.169708] initcall init_lapic_sysfs+0x0/0x17 returned 0 after 0 usecs [ 0.169714] calling cpu_hotplug_pm_sync_init+0x0/0xd @ 1 [ 0.169720] initcall cpu_hotplug_pm_sync_init+0x0/0xd returned 0 after 0 usecs [ 0.169725] calling alloc_frozen_cpus+0x0/0x3 @ 1 [ 0.169730] initcall alloc_frozen_cpus+0x0/0x3 returned 0 after 0 usecs [ 0.169734] calling wq_sysfs_init+0x0/0xc @ 1 [ 0.169799] initcall wq_sysfs_init+0x0/0xc returned 0 after 0 usecs [ 0.169803] calling ksysfs_init+0x0/0x76 @ 1 [ 0.169819] initcall ksysfs_init+0x0/0x76 returned 0 after 0 usecs [ 0.169823] calling pm_init+0x0/0x67 @ 1 [ 0.169880] initcall pm_init+0x0/0x67 returned 0 after 0 usecs [ 0.169884] calling pm_disk_init+0x0/0xf @ 1 [ 0.169892] initcall pm_disk_init+0x0/0xf returned 0 after 0 usecs [ 0.169900] calling swsusp_header_init+0x0/0x26 @ 1 [ 0.169906] initcall swsusp_header_init+0x0/0x26 returned 0 after 0 usecs [ 0.169911] calling init_jiffies_clocksource+0x0/0xa @ 1 [ 0.169917] initcall init_jiffies_clocksource+0x0/0xa returned 0 after 0 usecs [ 0.169923] calling event_trace_enable+0x0/0xea @ 1 [ 0.170019] initcall event_trace_enable+0x0/0xea returned 0 after 0 usecs [ 0.170026] calling init_zero_pfn+0x0/0x38 @ 1 [ 0.170031] initcall init_zero_pfn+0x0/0x38 returned 0 after 0 usecs [ 0.170036] calling fsnotify_init+0x0/0x1f @ 1 [ 0.170043] initcall fsnotify_init+0x0/0x1f returned 0 after 0 usecs [ 0.170047] calling filelock_init+0x0/0x26 @ 1 [ 0.170098] initcall filelock_init+0x0/0x26 returned 0 after 0 usecs [ 0.170102] calling init_script_binfmt+0x0/0xf @ 1 [ 0.170107] initcall init_script_binfmt+0x0/0xf returned 0 after 0 usecs [ 0.170111] calling init_elf_binfmt+0x0/0xf @ 1 [ 0.170115] initcall init_elf_binfmt+0x0/0xf returned 0 after 0 usecs [ 0.170120] calling debugfs_init+0x0/0x4a @ 1 [ 0.170130] initcall debugfs_init+0x0/0x4a returned 0 after 0 usecs [ 0.170134] calling securityfs_init+0x0/0x41 @ 1 [ 0.170142] initcall securityfs_init+0x0/0x41 returned 0 after 0 usecs [ 0.170148] calling prandom_init+0x0/0xa3 @ 1 [ 0.170154] initcall prandom_init+0x0/0xa3 returned 0 after 0 usecs [ 0.170159] calling sfi_sysfs_init+0x0/0xbd @ 1 [ 0.170163] initcall sfi_sysfs_init+0x0/0xbd returned 0 after 0 usecs [ 0.170168] calling regulator_init+0x0/0x5f @ 1 [ 0.170295] regulator-dummy: no parameters [ 0.170324] initcall regulator_init+0x0/0x5f returned 0 after 0 usecs [ 0.170330] calling cpufreq_core_init+0x0/0x8b @ 1 [ 0.170339] initcall cpufreq_core_init+0x0/0x8b returned 0 after 0 usecs [ 0.170343] calling cpuidle_init+0x0/0x34 @ 1 [ 0.170352] initcall cpuidle_init+0x0/0x34 returned 0 after 0 usecs [ 0.170356] calling bsp_pm_check_init+0x0/0xd @ 1 [ 0.170360] initcall bsp_pm_check_init+0x0/0xd returned 0 after 0 usecs [ 0.170364] calling sock_init+0x0/0x78 @ 1 [ 0.170471] initcall sock_init+0x0/0x78 returned 0 after 0 usecs [ 0.170475] calling net_inuse_init+0x0/0x1f @ 1 [ 0.170482] initcall net_inuse_init+0x0/0x1f returned 0 after 0 usecs [ 0.170487] calling netlink_proto_init+0x0/0x169 @ 1 [ 0.170503] NET: Registered protocol family 16 [ 0.170523] initcall netlink_proto_init+0x0/0x169 returned 0 after 0 usecs [ 0.170613] calling bdi_class_init+0x0/0x38 @ 1 [ 0.170629] initcall bdi_class_init+0x0/0x38 returned 0 after 0 usecs [ 0.170634] calling kobject_uevent_init+0x0/0xa @ 1 [ 0.170644] initcall kobject_uevent_init+0x0/0xa returned 0 after 0 usecs [ 0.170649] calling pcibus_class_init+0x0/0xf @ 1 [ 0.170660] initcall pcibus_class_init+0x0/0xf returned 0 after 0 usecs [ 0.170664] calling pci_driver_init+0x0/0xa @ 1 [ 0.170682] initcall pci_driver_init+0x0/0xa returned 0 after 0 usecs [ 0.170686] calling tty_class_init+0x0/0x27 @ 1 [ 0.170698] initcall tty_class_init+0x0/0x27 returned 0 after 0 usecs [ 0.170702] calling vtconsole_class_init+0x0/0xa1 @ 1 [ 0.170736] initcall vtconsole_class_init+0x0/0xa1 returned 0 after 0 usecs [ 0.170741] calling wakeup_sources_debugfs_init+0x0/0x26 @ 1 [ 0.170750] initcall wakeup_sources_debugfs_init+0x0/0x26 returned 0 after 0 usecs [ 0.170754] calling spi_init+0x0/0x6e @ 1 [ 0.170778] initcall spi_init+0x0/0x6e returned 0 after 0 usecs [ 0.170782] calling i2c_init+0x0/0x59 @ 1 [ 0.170809] initcall i2c_init+0x0/0x59 returned 0 after 0 usecs [ 0.170813] calling amd_postcore_init+0x0/0x113 @ 1 [ 0.170988] initcall amd_postcore_init+0x0/0x113 returned 0 after 0 usecs [ 0.171078] calling arch_kdebugfs_init+0x0/0x1a @ 1 [ 0.171093] initcall arch_kdebugfs_init+0x0/0x1a returned 0 after 0 usecs [ 0.171098] calling init_pit_clocksource+0x0/0x2c @ 1 [ 0.171102] initcall init_pit_clocksource+0x0/0x2c returned 0 after 0 usecs [ 0.171108] calling mtrr_if_init+0x0/0x4d @ 1 [ 0.171117] initcall mtrr_if_init+0x0/0x4d returned 0 after 0 usecs [ 0.171121] calling ffh_cstate_init+0x0/0x24 @ 1 [ 0.171125] initcall ffh_cstate_init+0x0/0x24 returned -1 after 0 usecs [ 0.171129] calling acpi_pci_init+0x0/0x51 @ 1 [ 0.171132] ACPI: bus type PCI registered [ 0.171136] initcall acpi_pci_init+0x0/0x51 returned 0 after 0 usecs [ 0.171141] calling dmi_id_init+0x0/0x286 @ 1 [ 0.171191] initcall dmi_id_init+0x0/0x286 returned 0 after 0 usecs [ 0.171196] calling pci_arch_init+0x0/0x67 @ 1 [ 0.171420] bios32_service(0x49435024): not present [ 0.171423] PCI: Using configuration type 1 for base access [ 0.171425] PCI: Using configuration type 1 for extended access [ 0.171439] initcall pci_arch_init+0x0/0x67 returned 0 after 0 usecs [ 0.171528] calling topology_init+0x0/0x2d @ 1 [ 0.171635] initcall topology_init+0x0/0x2d returned 0 after 0 usecs [ 0.171640] calling mtrr_init_finialize+0x0/0x2c @ 1 [ 0.171646] initcall mtrr_init_finialize+0x0/0x2c returned 0 after 0 usecs [ 0.171650] calling param_sysfs_init+0x0/0x157 @ 1 [ 0.172588] initcall param_sysfs_init+0x0/0x157 returned 0 after 3906 usecs [ 0.172592] calling pm_sysrq_init+0x0/0x12 @ 1 [ 0.172597] initcall pm_sysrq_init+0x0/0x12 returned 0 after 0 usecs [ 0.172602] calling default_bdi_init+0x0/0x55 @ 1 [ 0.172832] initcall default_bdi_init+0x0/0x55 returned 0 after 0 usecs [ 0.172841] calling init_bio+0x0/0xd8 @ 1 [ 0.172964] bio: create slab <bio-0> at 0 [ 0.173095] initcall init_bio+0x0/0xd8 returned 0 after 0 usecs [ 0.173106] calling fsnotify_notification_init+0x0/0x76 @ 1 [ 0.173141] initcall fsnotify_notification_init+0x0/0x76 returned 0 after 0 usecs [ 0.173147] calling cryptomgr_init+0x0/0xa @ 1 [ 0.173153] initcall cryptomgr_init+0x0/0xa returned 0 after 0 usecs [ 0.173158] calling blk_settings_init+0x0/0x19 @ 1 [ 0.173164] initcall blk_settings_init+0x0/0x19 returned 0 after 0 usecs [ 0.173168] calling blk_ioc_init+0x0/0x26 @ 1 [ 0.173212] initcall blk_ioc_init+0x0/0x26 returned 0 after 0 usecs [ 0.173217] calling blk_softirq_init+0x0/0x50 @ 1 [ 0.173222] initcall blk_softirq_init+0x0/0x50 returned 0 after 0 usecs [ 0.173227] calling blk_iopoll_setup+0x0/0x50 @ 1 [ 0.173232] initcall blk_iopoll_setup+0x0/0x50 returned 0 after 0 usecs [ 0.173236] calling genhd_device_init+0x0/0x5d @ 1 [ 0.173340] initcall genhd_device_init+0x0/0x5d returned 0 after 0 usecs [ 0.173345] calling blk_dev_integrity_init+0x0/0x26 @ 1 [ 0.173356] initcall blk_dev_integrity_init+0x0/0x26 returned 0 after 0 usecs [ 0.173362] calling gpiolib_debugfs_init+0x0/0x21 @ 1 [ 0.173377] initcall gpiolib_debugfs_init+0x0/0x21 returned 0 after 0 usecs [ 0.173382] calling pci_slot_init+0x0/0x3b @ 1 [ 0.173389] initcall pci_slot_init+0x0/0x3b returned 0 after 0 usecs [ 0.173393] calling fbmem_init+0x0/0x80 @ 1 [ 0.173412] initcall fbmem_init+0x0/0x80 returned 0 after 0 usecs [ 0.173416] calling acpi_init+0x0/0x25c @ 1 [ 0.173447] ACPI: Added _OSI(Module Device) [ 0.173450] ACPI: Added _OSI(Processor Device) [ 0.173454] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.173458] ACPI: Added _OSI(Processor Aggregator Device) [ 0.174777] ACPI: EC: Look up EC in DSDT [ 0.176256] ACPI: Executed 2 blocks of module-level executable AML code [ 0.181681] ACPI: Interpreter enabled [ 0.181704] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.181732] ACPI: (supports S0 S1 S3 S4 S5) [ 0.181736] ACPI: Using IOAPIC for interrupt routing [ 0.181766] HEST: Table parsing has been initialized. [ 0.181773] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.205834] ACPI: Power Resource [PFN0] (on) [ 0.206191] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.206436] PCI host bridge to bus 0000:00 [ 0.206444] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.206449] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.206454] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.206459] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.206464] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xffffffff] [ 0.206483] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 [ 0.206606] pci 0000:00:01.0: [1002:9802] type 00 class 0x030000 [ 0.206622] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff pref] [ 0.206633] pci 0000:00:01.0: reg 14: [io 0x2000-0x20ff] [ 0.206652] pci 0000:00:01.0: reg 18: [mem 0xf0100000-0xf013ffff] [ 0.206717] pci 0000:00:01.0: supports D1 D2 [ 0.206753] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.206829] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 [ 0.206844] pci 0000:00:01.1: reg 10: [mem 0xf0140000-0xf0143fff] [ 0.206919] pci 0000:00:01.1: supports D1 D2 [ 0.206954] pci 0000:00:01.1: System wakeup disabled by ACPI [ 0.207126] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 0.207153] pci 0000:00:11.0: reg 10: [io 0x2410-0x2417] [ 0.207168] pci 0000:00:11.0: reg 14: [io 0x2420-0x2423] [ 0.207182] pci 0000:00:11.0: reg 18: [io 0x2418-0x241f] [ 0.207197] pci 0000:00:11.0: reg 1c: [io 0x2424-0x2427] [ 0.207211] pci 0000:00:11.0: reg 20: [io 0x2400-0x240f] [ 0.207225] pci 0000:00:11.0: reg 24: [mem 0xf014b000-0xf014b3ff] [ 0.207463] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 0.207484] pci 0000:00:12.0: reg 10: [mem 0xf0148000-0xf0148fff] [ 0.207612] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.207761] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 0.207789] pci 0000:00:12.2: reg 10: [mem 0xf014b400-0xf014b4ff] [ 0.207899] pci 0000:00:12.2: supports D1 D2 [ 0.207904] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.207972] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.208123] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 0.208144] pci 0000:00:13.0: reg 10: [mem 0xf0149000-0xf0149fff] [ 0.208277] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.208420] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 0.208448] pci 0000:00:13.2: reg 10: [mem 0xf014b500-0xf014b5ff] [ 0.208559] pci 0000:00:13.2: supports D1 D2 [ 0.208563] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.208637] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.208781] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 0.209060] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 0.209091] pci 0000:00:14.2: reg 10: [mem 0xf0144000-0xf0147fff 64bit] [ 0.209182] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.209392] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 0.209674] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 0.209770] pci 0000:00:14.4: System wakeup disabled by ACPI [ 0.209907] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 0.209927] pci 0000:00:14.5: reg 10: [mem 0xf014a000-0xf014afff] [ 0.210074] pci 0000:00:14.5: System wakeup disabled by ACPI [ 0.210216] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 0.210325] pci 0000:00:15.0: supports D1 D2 [ 0.210380] pci 0000:00:15.0: System wakeup disabled by ACPI [ 0.210524] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 [ 0.210633] pci 0000:00:15.1: supports D1 D2 [ 0.210698] pci 0000:00:15.1: System wakeup disabled by ACPI [ 0.210848] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 [ 0.211012] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 [ 0.211173] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 [ 0.211334] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 [ 0.211509] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 [ 0.211671] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 [ 0.211828] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 [ 0.211989] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 [ 0.212328] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode) [ 0.212344] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.212349] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.212353] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.212358] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xffffffff] (subtractive decode) [ 0.212461] pci 0000:00:15.0: PCI bridge to [bus 02] [ 0.212599] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.212624] pci 0000:03:00.0: reg 10: [io 0x1000-0x10ff] [ 0.212665] pci 0000:03:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref] [ 0.212691] pci 0000:03:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref] [ 0.212795] pci 0000:03:00.0: supports D1 D2 [ 0.212799] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.222953] pci 0000:00:15.1: PCI bridge to [bus 03] [ 0.222971] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] [ 0.222985] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.223014] pci_bus 0000:00: on NUMA node 0 [ 0.223132] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.223225] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted [ 0.223802] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.224050] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.224224] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.224397] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.224570] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.224743] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. [ 0.224912] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.225084] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.226762] ACPI: Enabled 6 GPEs in block 00 to 1F [ 0.226775] acpi root: \_SB_.PCI0 notify handler is installed [ 0.226836] Found 1 acpi root devices [ 0.226979] initcall acpi_init+0x0/0x25c returned 0 after 50781 usecs [ 0.226985] calling pnp_init+0x0/0xa @ 1 [ 0.227011] initcall pnp_init+0x0/0xa returned 0 after 0 usecs [ 0.227016] calling misc_init+0x0/0x9a @ 1 [ 0.227037] initcall misc_init+0x0/0x9a returned 0 after 0 usecs [ 0.227041] calling vga_arb_device_init+0x0/0xba @ 1 [ 0.227302] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.227318] vgaarb: loaded [ 0.227321] vgaarb: bridge control possible 0000:00:01.0 [ 0.227331] initcall vga_arb_device_init+0x0/0xba returned 0 after 0 usecs [ 0.227339] calling cn_init+0x0/0x9b @ 1 [ 0.227373] initcall cn_init+0x0/0x9b returned 0 after 0 usecs [ 0.227378] calling dma_buf_init+0x0/0x5e @ 1 [ 0.227401] initcall dma_buf_init+0x0/0x5e returned 0 after 0 usecs [ 0.227405] calling usb_init+0x0/0x139 @ 1 [ 0.227414] ACPI: bus type USB registered [ 0.227463] usbcore: registered new interface driver usbfs [ 0.227485] usbcore: registered new interface driver hub [ 0.227768] usbcore: registered new device driver usb [ 0.227786] initcall usb_init+0x0/0x139 returned 0 after 0 usecs [ 0.227793] calling serio_init+0x0/0x28 @ 1 [ 0.227815] initcall serio_init+0x0/0x28 returned 0 after 0 usecs [ 0.227819] calling input_init+0x0/0xe5 @ 1 [ 0.227850] initcall input_init+0x0/0xe5 returned 0 after 0 usecs [ 0.227854] calling rtc_init+0x0/0x53 @ 1 [ 0.227866] initcall rtc_init+0x0/0x53 returned 0 after 0 usecs [ 0.227871] calling power_supply_class_init+0x0/0x31 @ 1 [ 0.227883] initcall power_supply_class_init+0x0/0x31 returned 0 after 0 usecs [ 0.227887] calling hwmon_init+0x0/0xde @ 1 [ 0.227904] initcall hwmon_init+0x0/0xde returned 0 after 0 usecs [ 0.227909] calling efisubsys_init+0x0/0x101 @ 1 [ 0.227915] initcall efisubsys_init+0x0/0x101 returned 0 after 0 usecs [ 0.227920] calling pci_subsys_init+0x0/0x40 @ 1 [ 0.227922] PCI: Using ACPI for IRQ routing [ 0.227928] PCI: pci_cache_line_size set to 64 bytes [ 0.228085] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.228090] e820: reserve RAM buffer [mem 0xc7fe0000-0xc7ffffff] [ 0.228096] initcall pci_subsys_init+0x0/0x40 returned 0 after 0 usecs [ 0.228100] calling proto_init+0x0/0xa @ 1 [ 0.228108] initcall proto_init+0x0/0xa returned 0 after 0 usecs [ 0.228111] calling net_dev_init+0x0/0x15e @ 1 [ 0.228296] initcall net_dev_init+0x0/0x15e returned 0 after 0 usecs [ 0.228300] calling neigh_init+0x0/0x75 @ 1 [ 0.228305] initcall neigh_init+0x0/0x75 returned 0 after 0 usecs [ 0.228310] calling fib_rules_init+0x0/0x9d @ 1 [ 0.228316] initcall fib_rules_init+0x0/0x9d returned 0 after 0 usecs [ 0.228320] calling pktsched_init+0x0/0xdf @ 1 [ 0.228329] initcall pktsched_init+0x0/0xdf returned 0 after 0 usecs [ 0.228332] calling tc_filter_init+0x0/0x4c @ 1 [ 0.228337] initcall tc_filter_init+0x0/0x4c returned 0 after 0 usecs [ 0.228341] calling tc_action_init+0x0/0x4c @ 1 [ 0.228345] initcall tc_action_init+0x0/0x4c returned 0 after 0 usecs [ 0.228349] calling genl_init+0x0/0x5f @ 1 [ 0.228375] initcall genl_init+0x0/0x5f returned 0 after 0 usecs [ 0.228475] calling hpet_late_init+0x0/0xc5 @ 1 [ 0.228576] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.228584] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.230597] initcall hpet_late_init+0x0/0xc5 returned 0 after 3906 usecs [ 0.230601] calling init_amd_nbs+0x0/0x99 @ 1 [ 0.230620] initcall init_amd_nbs+0x0/0x99 returned 0 after 0 usecs [ 0.230626] calling clocksource_done_booting+0x0/0x4b @ 1 [ 0.230630] Switching to clocksource hpet [ 0.230776] initcall clocksource_done_booting+0x0/0x4b returned 0 after 6 usecs [ 0.230782] calling tracer_init_debugfs+0x0/0x185 @ 1 [ 0.231002] initcall tracer_init_debugfs+0x0/0x185 returned 0 after 209 usecs [ 0.231007] calling init_trace_printk_function_export+0x0/0x2a @ 1 [ 0.231017] initcall init_trace_printk_function_export+0x0/0x2a returned 0 after 3 usecs [ 0.231021] calling event_trace_init+0x0/0x18a @ 1 [ 0.233734] initcall event_trace_init+0x0/0x18a returned 0 after 2637 usecs [ 0.233743] calling init_pipe_fs+0x0/0x39 @ 1 [ 0.233788] initcall init_pipe_fs+0x0/0x39 returned 0 after 38 usecs [ 0.233793] calling eventpoll_init+0x0/0xdf @ 1 [ 0.233930] initcall eventpoll_init+0x0/0xdf returned 0 after 127 usecs [ 0.233934] calling anon_inode_init+0x0/0x4a @ 1 [ 0.233961] initcall anon_inode_init+0x0/0x4a returned 0 after 20 usecs [ 0.233967] calling tomoyo_initerface_init+0x0/0x133 @ 1 [ 0.233974] initcall tomoyo_initerface_init+0x0/0x133 returned 0 after 0 usecs [ 0.233979] calling blk_scsi_ioctl_init+0x0/0x282 @ 1 [ 0.233987] initcall blk_scsi_ioctl_init+0x0/0x282 returned 0 after 2 usecs [ 0.233992] calling acpi_event_init+0x0/0x49 @ 1 [ 0.234015] initcall acpi_event_init+0x0/0x49 returned 0 after 16 usecs [ 0.234019] calling pnp_system_init+0x0/0xa @ 1 [ 0.234051] initcall pnp_system_init+0x0/0xa returned 0 after 26 usecs [ 0.234056] calling pnpacpi_init+0x0/0x7b @ 1 [ 0.234059] pnp: PnP ACPI init [ 0.234089] ACPI: bus type PNP registered [ 0.234560] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.234627] pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.234654] pnp 00:02: [dma 4] [ 0.234698] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.234811] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.235183] pnp 00:04: Plug and Play ACPI device, IDs PNP0a05 (active) [ 0.235459] pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (disabled) [ 0.235774] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (disabled) [ 0.236364] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.236660] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (disabled) [ 0.237440] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.237863] pnp 00:0a: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.238106] pnp 00:0b: Plug and Play ACPI device, IDs PNPb02f (disabled) [ 0.238343] pnp 00:0c: Plug and Play ACPI device, IDs PNPb006 (disabled) [ 0.238735] pnp 00:0d: [irq 0 disabled] [ 0.238904] system 00:0d: [io 0x0290-0x0291] has been reserved [ 0.238912] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.238934] pnp: PnP ACPI: found 14 devices [ 0.238937] ACPI: bus type PNP unregistered [ 0.239014] initcall pnpacpi_init+0x0/0x7b returned 0 after 4833 usecs [ 0.239019] calling chr_dev_init+0x0/0xa9 @ 1 [ 0.257311] initcall chr_dev_init+0x0/0xa9 returned 0 after 17848 usecs [ 0.257322] calling firmware_class_init+0x0/0xc5 @ 1 [ 0.257345] initcall firmware_class_init+0x0/0xc5 returned 0 after 16 usecs [ 0.257352] calling cpufreq_gov_performance_init+0x0/0xa @ 1 [ 0.257361] initcall cpufreq_gov_performance_init+0x0/0xa returned 0 after 1 usecs [ 0.257365] calling cpufreq_gov_dbs_init+0x0/0xa @ 1 [ 0.257373] initcall cpufreq_gov_dbs_init+0x0/0xa returned 0 after 1 usecs [ 0.257378] calling init_acpi_pm_clocksource+0x0/0x17d @ 1 [ 0.292514] initcall init_acpi_pm_clocksource+0x0/0x17d returned 0 after 34305 usecs [ 0.292519] calling pcibios_assign_resources+0x0/0x8f @ 1 [ 0.292568] pci 0000:00:14.4: PCI bridge to [bus 01] [ 0.292589] pci 0000:00:15.0: PCI bridge to [bus 02] [ 0.292605] pci 0000:00:15.1: PCI bridge to [bus 03] [ 0.292612] pci 0000:00:15.1: bridge window [io 0x1000-0x1fff] [ 0.292623] pci 0000:00:15.1: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.293170] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.293175] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.293180] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.293184] pci_bus 0000:00: resource 7 [mem 0xe0000000-0xffffffff] [ 0.293189] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7] [ 0.293194] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff] [ 0.293198] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff] [ 0.293202] pci_bus 0000:01: resource 7 [mem 0xe0000000-0xffffffff] [ 0.293207] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.293212] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] [ 0.293289] initcall pcibios_assign_resources+0x0/0x8f returned 0 after 743 usecs [ 0.293294] calling sysctl_core_init+0x0/0x1e @ 1 [ 0.293323] initcall sysctl_core_init+0x0/0x1e returned 0 after 22 usecs [ 0.293327] calling inet_init+0x0/0x254 @ 1 [ 0.293517] NET: Registered protocol family 2 [ 0.294005] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.294089] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.294145] TCP: Hash tables configured (established 8192 bind 8192) [ 0.294190] TCP: reno registered [ 0.294196] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.294210] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.294503] initcall inet_init+0x0/0x254 returned 0 after 1140 usecs [ 0.294507] calling ipv4_offload_init+0x0/0x59 @ 1 [ 0.294515] initcall ipv4_offload_init+0x0/0x59 returned 0 after 1 usecs [ 0.294519] calling af_unix_init+0x0/0x47 @ 1 [ 0.294566] NET: Registered protocol family 1 [ 0.294580] initcall af_unix_init+0x0/0x47 returned 0 after 53 usecs [ 0.294584] calling ipv6_offload_init+0x0/0x5f @ 1 [ 0.294592] initcall ipv6_offload_init+0x0/0x5f returned 0 after 1 usecs [ 0.294601] calling pci_apply_final_quirks+0x0/0xe4 @ 1 [ 0.294620] pci 0000:00:01.0: Boot video device [ 0.296955] PCI: CLS 64 bytes, default 64 [ 0.296963] initcall pci_apply_final_quirks+0x0/0xe4 returned 0 after 2299 usecs [ 0.296969] calling populate_rootfs+0x0/0xe4 @ 1 [ 0.297073] Unpacking initramfs... [ 1.473475] Freeing initrd memory: 25912k freed [ 1.489906] initcall populate_rootfs+0x0/0xe4 returned 0 after 1164960 usecs [ 1.489916] calling pci_iommu_init+0x0/0x30 @ 1 [ 1.489925] initcall pci_iommu_init+0x0/0x30 returned 0 after 1 usecs [ 1.490024] calling i8259A_init_ops+0x0/0x19 @ 1 [ 1.490101] initcall i8259A_init_ops+0x0/0x19 returned 0 after 1 usecs [ 1.490105] calling sbf_init+0x0/0xe3 @ 1 [ 1.490112] initcall sbf_init+0x0/0xe3 returned 0 after 0 usecs [ 1.490117] calling init_tsc_clocksource+0x0/0xa3 @ 1 [ 1.490140] initcall init_tsc_clocksource+0x0/0xa3 returned 0 after 14 usecs [ 1.490144] calling add_rtc_cmos+0x0/0x77 @ 1 [ 1.490153] initcall add_rtc_cmos+0x0/0x77 returned 0 after 2 usecs [ 1.490157] calling i8237A_init_ops+0x0/0xd @ 1 [ 1.490183] initcall i8237A_init_ops+0x0/0xd returned 0 after 19 usecs [ 1.490188] calling cache_sysfs_init+0x0/0x47 @ 1 [ 1.490483] initcall cache_sysfs_init+0x0/0x47 returned 0 after 281 usecs [ 1.490489] calling amd_uncore_init+0x0/0x10f @ 1 [ 1.490496] initcall amd_uncore_init+0x0/0x10f returned -19 after 0 usecs [ 1.490501] calling intel_uncore_init+0x0/0x2ea @ 1 [ 1.490509] initcall intel_uncore_init+0x0/0x2ea returned -19 after 1 usecs [ 1.490514] calling thermal_throttle_init_device+0x0/0x71 @ 1 [ 1.490521] initcall thermal_throttle_init_device+0x0/0x71 returned 0 after 1 usecs [ 1.490525] calling amd_ibs_init+0x0/0x229 @ 1 [ 1.490531] LVT offset 0 assigned for vector 0x400 [ 1.490681] perf: AMD IBS detected (0x000000ff) [ 1.490687] initcall amd_ibs_init+0x0/0x229 returned 0 after 152 usecs [ 1.490693] calling ioapic_init_ops+0x0/0xd @ 1 [ 1.490700] initcall ioapic_init_ops+0x0/0xd returned 0 after 1 usecs [ 1.490704] calling add_pcspkr+0x0/0x37 @ 1 [ 1.490880] initcall add_pcspkr+0x0/0x37 returned 0 after 164 usecs [ 1.490886] calling proc_execdomains_init+0x0/0x1e @ 1 [ 1.490901] initcall proc_execdomains_init+0x0/0x1e returned 0 after 8 usecs [ 1.490906] calling ioresources_init+0x0/0x34 @ 1 [ 1.490919] initcall ioresources_init+0x0/0x34 returned 0 after 7 usecs [ 1.490924] calling uid_cache_init+0x0/0x76 @ 1 [ 1.490941] initcall uid_cache_init+0x0/0x76 returned 0 after 12 usecs [ 1.490946] calling init_posix_timers+0x0/0x1d4 @ 1 [ 1.490971] initcall init_posix_timers+0x0/0x1d4 returned 0 after 18 usecs [ 1.490975] calling init_posix_cpu_timers+0x0/0x99 @ 1 [ 1.490982] initcall init_posix_cpu_timers+0x0/0x99 returned 0 after 1 usecs [ 1.490987] calling init_sched_debug_procfs+0x0/0x27 @ 1 [ 1.490995] initcall init_sched_debug_procfs+0x0/0x27 returned 0 after 2 usecs [ 1.490999] calling snapshot_device_init+0x0/0xa @ 1 [ 1.491409] initcall snapshot_device_init+0x0/0xa returned 0 after 385 usecs [ 1.491422] calling create_proc_profile+0x0/0x1a9 @ 1 [ 1.491429] initcall create_proc_profile+0x0/0x1a9 returned 0 after 1 usecs [ 1.491434] calling timekeeping_init_ops+0x0/0xd @ 1 [ 1.491442] initcall timekeeping_init_ops+0x0/0xd returned 0 after 1 usecs [ 1.491446] calling init_clocksource_sysfs+0x0/0x41 @ 1 [ 1.491598] initcall init_clocksource_sysfs+0x0/0x41 returned 0 after 141 usecs [ 1.491603] calling init_timer_list_procfs+0x0/0x27 @ 1 [ 1.491617] initcall init_timer_list_procfs+0x0/0x27 returned 0 after 7 usecs [ 1.491621] calling alarmtimer_init+0x0/0xee @ 1 [ 1.491748] initcall alarmtimer_init+0x0/0xee returned 0 after 118 usecs [ 1.491753] calling init_tstats_procfs+0x0/0x27 @ 1 [ 1.491762] initcall init_tstats_procfs+0x0/0x27 returned 0 after 3 usecs [ 1.491766] calling futex_init+0x0/0x42 @ 1 [ 1.491778] initcall futex_init+0x0/0x42 returned 0 after 7 usecs [ 1.491782] calling proc_dma_init+0x0/0x1e @ 1 [ 1.491790] initcall proc_dma_init+0x0/0x1e returned 0 after 2 usecs [ 1.491795] calling proc_modules_init+0x0/0x1e @ 1 [ 1.491803] initcall proc_modules_init+0x0/0x1e returned 0 after 2 usecs [ 1.491807] calling kallsyms_init+0x0/0x21 @ 1 [ 1.491814] initcall kallsyms_init+0x0/0x21 returned 0 after 2 usecs [ 1.491819] calling crash_save_vmcoreinfo_init+0x0/0x3ea @ 1 [ 1.491941] initcall crash_save_vmcoreinfo_init+0x0/0x3ea returned 0 after 113 usecs [ 1.491946] calling crash_notes_memory_init+0x0/0x31 @ 1 [ 1.491961] initcall crash_notes_memory_init+0x0/0x31 returned 0 after 9 usecs [ 1.491966] calling pid_namespaces_init+0x0/0x29 @ 1 [ 1.492095] initcall pid_namespaces_init+0x0/0x29 returned 0 after 120 usecs [ 1.492099] calling audit_init+0x0/0x121 @ 1 [ 1.492103] audit: initializing netlink socket (disabled) [ 1.492129] type=2000 audit(1373523875.388:1): initialized [ 1.492138] initcall audit_init+0x0/0x121 returned 0 after 31 usecs [ 1.492142] calling audit_watch_init+0x0/0x2d @ 1 [ 1.492149] initcall audit_watch_init+0x0/0x2d returned 0 after 1 usecs [ 1.492153] calling audit_tree_init+0x0/0x37 @ 1 [ 1.492161] initcall audit_tree_init+0x0/0x37 returned 0 after 2 usecs [ 1.492165] calling init_kprobes+0x0/0x13c @ 1 [ 1.524799] initcall init_kprobes+0x0/0x13c returned 0 after 31861 usecs [ 1.524803] calling hung_task_init+0x0/0x44 @ 1 [ 1.525108] initcall hung_task_init+0x0/0x44 returned 0 after 279 usecs [ 1.525118] calling irq_pm_init_ops+0x0/0xd @ 1 [ 1.525126] initcall irq_pm_init_ops+0x0/0xd returned 0 after 1 usecs [ 1.525131] calling utsname_sysctl_init+0x0/0xd @ 1 [ 1.525155] initcall utsname_sysctl_init+0x0/0xd returned 0 after 17 usecs [ 1.525161] calling init_tracepoints+0x0/0xa @ 1 [ 1.525169] initcall init_tracepoints+0x0/0xa returned 0 after 2 usecs [ 1.525173] calling init_blk_tracer+0x0/0x47 @ 1 [ 1.525183] initcall init_blk_tracer+0x0/0x47 returned 0 after 4 usecs [ 1.525188] calling irq_work_init_cpu_notifier+0x0/0x21 @ 1 [ 1.525196] initcall irq_work_init_cpu_notifier+0x0/0x21 returned 0 after 2 usecs [ 1.525201] calling perf_event_sysfs_init+0x0/0x80 @ 1 [ 1.525483] initcall perf_event_sysfs_init+0x0/0x80 returned 0 after 268 usecs [ 1.525489] calling init_per_zone_wmark_min+0x0/0x73 @ 1 [ 1.525730] initcall init_per_zone_wmark_min+0x0/0x73 returned 0 after 229 usecs [ 1.525735] calling kswapd_init+0x0/0x19 @ 1 [ 1.526040] initcall kswapd_init+0x0/0x19 returned 0 after 280 usecs [ 1.526051] calling extfrag_debug_init+0x0/0x69 @ 1 [ 1.526084] initcall extfrag_debug_init+0x0/0x69 returned 0 after 24 usecs [ 1.526089] calling setup_vmstat+0x0/0x9b @ 1 [ 1.526118] initcall setup_vmstat+0x0/0x9b returned 0 after 21 usecs [ 1.526123] calling mm_sysfs_init+0x0/0x1e @ 1 [ 1.526141] initcall mm_sysfs_init+0x0/0x1e returned 0 after 10 usecs [ 1.526146] calling slab_proc_init+0x0/0x21 @ 1 [ 1.526155] initcall slab_proc_init+0x0/0x21 returned 0 after 2 usecs [ 1.526162] calling init_reserve_notifier+0x0/0x3 @ 1 [ 1.526169] initcall init_reserve_notifier+0x0/0x3 returned 0 after 0 usecs [ 1.526174] calling init_admin_reserve+0x0/0x29 @ 1 [ 1.526181] initcall init_admin_reserve+0x0/0x29 returned 0 after 1 usecs [ 1.526184] calling init_user_reserve+0x0/0x29 @ 1 [ 1.526190] initcall init_user_reserve+0x0/0x29 returned 0 after 0 usecs [ 1.526195] calling proc_vmalloc_init+0x0/0x21 @ 1 [ 1.526204] initcall proc_vmalloc_init+0x0/0x21 returned 0 after 2 usecs [ 1.526208] calling init_emergency_pool+0x0/0x47 @ 1 [ 1.526239] bounce pool size: 64 pages [ 1.526245] initcall init_emergency_pool+0x0/0x47 returned 0 after 31 usecs [ 1.526249] calling procswaps_init+0x0/0x1e @ 1 [ 1.526257] initcall procswaps_init+0x0/0x1e returned 0 after 2 usecs [ 1.526261] calling hugetlb_init+0x0/0x2b6 @ 1 [ 1.526268] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.526287] initcall hugetlb_init+0x0/0x2b6 returned 0 after 20 usecs [ 1.526291] calling mmu_notifier_init+0x0/0xa @ 1 [ 1.526306] initcall mmu_notifier_init+0x0/0xa returned 0 after 9 usecs [ 1.526309] calling ksm_init+0x0/0x120 @ 1 [ 1.526738] initcall ksm_init+0x0/0x120 returned 0 after 402 usecs [ 1.526748] calling slab_proc_init+0x0/0x3 @ 1 [ 1.526755] initcall slab_proc_init+0x0/0x3 returned 0 after 0 usecs [ 1.526759] calling cpucache_init+0x0/0x37 @ 1 [ 1.526796] initcall cpucache_init+0x0/0x37 returned 0 after 29 usecs [ 1.526800] calling hugepage_init+0x0/0x10d @ 1 [ 1.527514] initcall hugepage_init+0x0/0x10d returned 0 after 680 usecs [ 1.527524] calling fcntl_init+0x0/0x26 @ 1 [ 1.527567] initcall fcntl_init+0x0/0x26 returned 0 after 35 usecs [ 1.527572] calling proc_filesystems_init+0x0/0x1e @ 1 [ 1.527589] initcall proc_filesystems_init+0x0/0x1e returned 0 after 10 usecs [ 1.527594] calling dio_init+0x0/0x29 @ 1 [ 1.527642] initcall dio_init+0x0/0x29 returned 0 after 42 usecs [ 1.527646] calling fsnotify_mark_init+0x0/0x33 @ 1 [ 1.527921] initcall fsnotify_mark_init+0x0/0x33 returned 0 after 250 usecs [ 1.527930] calling dnotify_init+0x0/0x6a @ 1 [ 1.527979] initcall dnotify_init+0x0/0x6a returned 0 after 41 usecs [ 1.527983] calling inotify_user_setup+0x0/0x68 @ 1 [ 1.528017] initcall inotify_user_setup+0x0/0x68 returned 0 after 27 usecs [ 1.528022] calling fanotify_user_setup+0x0/0x4a @ 1 [ 1.528051] initcall fanotify_user_setup+0x0/0x4a returned 0 after 23 usecs [ 1.528055] calling aio_setup+0x0/0x4a @ 1 [ 1.528087] initcall aio_setup+0x0/0x4a returned 0 after 25 usecs [ 1.528090] calling proc_locks_init+0x0/0x1e @ 1 [ 1.528107] initcall proc_locks_init+0x0/0x1e returned 0 after 10 usecs [ 1.528111] calling dquot_init+0x0/0xf3 @ 1 [ 1.528114] VFS: Disk quotas dquot_6.5.2 [ 1.528273] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.528280] initcall dquot_init+0x0/0xf3 returned 0 after 159 usecs [ 1.528284] calling quota_init+0x0/0x20 @ 1 [ 1.528303] initcall quota_init+0x0/0x20 returned 0 after 13 usecs [ 1.528307] calling proc_cmdline_init+0x0/0x1e @ 1 [ 1.528316] initcall proc_cmdline_init+0x0/0x1e returned 0 after 3 usecs [ 1.528320] calling proc_consoles_init+0x0/0x1e @ 1 [ 1.528329] initcall proc_consoles_init+0x0/0x1e returned 0 after 3 usecs [ 1.528333] calling proc_cpuinfo_init+0x0/0x1e @ 1 [ 1.528341] initcall proc_cpuinfo_init+0x0/0x1e returned 0 after 2 usecs [ 1.528345] calling proc_devices_init+0x0/0x1e @ 1 [ 1.528353] initcall proc_devices_init+0x0/0x1e returned 0 after 2 usecs [ 1.528357] calling proc_interrupts_init+0x0/0x1e @ 1 [ 1.528365] initcall proc_interrupts_init+0x0/0x1e returned 0 after 2 usecs [ 1.528369] calling proc_loadavg_init+0x0/0x1e @ 1 [ 1.528377] initcall proc_loadavg_init+0x0/0x1e returned 0 after 2 usecs [ 1.528381] calling proc_meminfo_init+0x0/0x1e @ 1 [ 1.528389] initcall proc_meminfo_init+0x0/0x1e returned 0 after 2 usecs [ 1.528393] calling proc_stat_init+0x0/0x1e @ 1 [ 1.528401] initcall proc_stat_init+0x0/0x1e returned 0 after 2 usecs [ 1.528405] calling proc_uptime_init+0x0/0x1e @ 1 [ 1.528413] initcall proc_uptime_init+0x0/0x1e returned 0 after 3 usecs [ 1.528417] calling proc_version_init+0x0/0x1e @ 1 [ 1.528425] initcall proc_version_init+0x0/0x1e returned 0 after 2 usecs [ 1.528429] calling proc_softirqs_init+0x0/0x1e @ 1 [ 1.528437] initcall proc_softirqs_init+0x0/0x1e returned 0 after 2 usecs [ 1.528441] calling proc_kcore_init+0x0/0xa0 @ 1 [ 1.528451] initcall proc_kcore_init+0x0/0xa0 returned 0 after 3 usecs [ 1.528454] calling proc_kmsg_init+0x0/0x21 @ 1 [ 1.528463] initcall proc_kmsg_init+0x0/0x21 returned 0 after 2 usecs [ 1.528467] calling proc_page_init+0x0/0x3a @ 1 [ 1.528477] initcall proc_page_init+0x0/0x3a returned 0 after 4 usecs [ 1.528481] calling init_devpts_fs+0x0/0x4e @ 1 [ 1.528609] initcall init_devpts_fs+0x0/0x4e returned 0 after 119 usecs [ 1.528613] calling init_ramfs_fs+0x0/0xa @ 1 [ 1.528621] initcall init_ramfs_fs+0x0/0xa returned 0 after 2 usecs [ 1.528625] calling init_hugetlbfs_fs+0x0/0x126 @ 1 [ 1.528768] initcall init_hugetlbfs_fs+0x0/0x126 returned 0 after 133 usecs [ 1.528772] calling init_pstore_fs+0x0/0x3f @ 1 [ 1.528789] initcall init_pstore_fs+0x0/0x3f returned 0 after 11 usecs [ 1.528793] calling ipc_init+0x0/0x1c @ 1 [ 1.528802] msgmni has been set to 1712 [ 1.528813] initcall ipc_init+0x0/0x1c returned 0 after 14 usecs [ 1.528817] calling ipc_sysctl_init+0x0/0xd @ 1 [ 1.528834] initcall ipc_sysctl_init+0x0/0xd returned 0 after 11 usecs [ 1.528838] calling init_mqueue_fs+0x0/0x8f @ 1 [ 1.528964] initcall init_mqueue_fs+0x0/0x8f returned 0 after 116 usecs [ 1.528968] calling key_proc_init+0x0/0x4e @ 1 [ 1.528980] initcall key_proc_init+0x0/0x4e returned 0 after 7 usecs [ 1.528985] calling selinux_nf_ip_init+0x0/0x5a @ 1 [ 1.528988] SELinux: Registering netfilter hooks [ 1.528996] initcall selinux_nf_ip_init+0x0/0x5a returned 0 after 5 usecs [ 1.529000] calling init_sel_fs+0x0/0x8a @ 1 [ 1.529186] initcall init_sel_fs+0x0/0x8a returned 0 after 175 usecs [ 1.529190] calling selnl_init+0x0/0x4f @ 1 [ 1.529206] initcall selnl_init+0x0/0x4f returned 0 after 10 usecs [ 1.529211] calling sel_netif_init+0x0/0x4f @ 1 [ 1.529221] initcall sel_netif_init+0x0/0x4f returned 0 after 4 usecs [ 1.529225] calling sel_netnode_init+0x0/0x4c @ 1 [ 1.529234] initcall sel_netnode_init+0x0/0x4c returned 0 after 3 usecs [ 1.529239] calling sel_netport_init+0x0/0x4c @ 1 [ 1.529247] initcall sel_netport_init+0x0/0x4c returned 0 after 2 usecs [ 1.529251] calling aurule_init+0x0/0x25 @ 1 [ 1.529257] initcall aurule_init+0x0/0x25 returned 0 after 0 usecs [ 1.529261] calling crypto_wq_init+0x0/0x27 @ 1 [ 1.529366] initcall crypto_wq_init+0x0/0x27 returned 0 after 95 usecs [ 1.529371] calling crypto_algapi_init+0x0/0x8 @ 1 [ 1.529383] initcall crypto_algapi_init+0x0/0x8 returned 0 after 6 usecs [ 1.529388] calling skcipher_module_init+0x0/0x26 @ 1 [ 1.529395] initcall skcipher_module_init+0x0/0x26 returned 0 after 1 usecs [ 1.529399] calling chainiv_module_init+0x0/0xa @ 1 [ 1.529407] initcall chainiv_module_init+0x0/0xa returned 0 after 2 usecs [ 1.529412] calling eseqiv_module_init+0x0/0xa @ 1 [ 1.529418] initcall eseqiv_module_init+0x0/0xa returned 0 after 0 usecs [ 1.529422] calling md5_mod_init+0x0/0xa @ 1 [ 1.529741] initcall md5_mod_init+0x0/0xa returned 0 after 293 usecs [ 1.529752] calling aes_init+0x0/0xa @ 1 [ 1.530228] initcall aes_init+0x0/0xa returned 0 after 446 usecs [ 1.530237] calling krng_mod_init+0x0/0xa @ 1 [ 1.530473] alg: No test for stdrng (krng) [ 1.530513] initcall krng_mod_init+0x0/0xa returned 0 after 251 usecs [ 1.530525] calling proc_genhd_init+0x0/0x34 @ 1 [ 1.530548] initcall proc_genhd_init+0x0/0x34 returned 0 after 15 usecs [ 1.530553] calling bsg_init+0x0/0x10d @ 1 [ 1.530699] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.530706] initcall bsg_init+0x0/0x10d returned 0 after 142 usecs [ 1.530710] calling noop_init+0x0/0xa @ 1 [ 1.530715] io scheduler noop registered [ 1.530721] initcall noop_init+0x0/0xa returned 0 after 4 usecs [ 1.530725] calling deadline_init+0x0/0xa @ 1 [ 1.530730] io scheduler deadline registered [ 1.530735] initcall deadline_init+0x0/0xa returned 0 after 4 usecs [ 1.530739] calling cfq_init+0x0/0xa7 @ 1 [ 1.530760] io scheduler cfq registered (default) [ 1.530766] initcall cfq_init+0x0/0xa7 returned 0 after 21 usecs [ 1.530807] calling percpu_counter_startup+0x0/0x12 @ 1 [ 1.530818] initcall percpu_counter_startup+0x0/0x12 returned 0 after 4 usecs [ 1.530822] calling audit_classes_init+0x0/0x4b @ 1 [ 1.530833] initcall audit_classes_init+0x0/0x4b returned 0 after 4 usecs [ 1.530838] calling pci_proc_init+0x0/0x5b @ 1 [ 1.530988] initcall pci_proc_init+0x0/0x5b returned 0 after 140 usecs [ 1.530992] calling pcie_portdrv_init+0x0/0x6c @ 1 [ 1.531162] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X [ 1.531301] pcieport 0000:00:15.1: irq 41 for MSI/MSI-X [ 1.531411] initcall pcie_portdrv_init+0x0/0x6c returned 0 after 403 usecs [ 1.531415] calling aer_service_init+0x0/0x22 @ 1 [ 1.531432] initcall aer_service_init+0x0/0x22 returned 0 after 10 usecs [ 1.531436] calling pcie_pme_service_init+0x0/0xa @ 1 [ 1.531482] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt [ 1.531491] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded [ 1.531523] pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt [ 1.531528] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 1.531535] pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded [ 1.531551] initcall pcie_pme_service_init+0x0/0xa returned 0 after 107 usecs [ 1.531555] calling ioapic_init+0x0/0x11 @ 1 [ 1.531577] initcall ioapic_init+0x0/0x11 returned 0 after 16 usecs [ 1.531581] calling fb_console_init+0x0/0x171 @ 1 [ 1.531619] initcall fb_console_init+0x0/0x171 returned 0 after 32 usecs [ 1.531623] calling vesafb_init+0x0/0x203 @ 1 [ 1.531778] initcall vesafb_init+0x0/0x203 returned -19 after 145 usecs [ 1.531781] calling efifb_init+0x0/0x243 @ 1 [ 1.531801] initcall efifb_init+0x0/0x243 returned -19 after 14 usecs [ 1.531806] calling acpi_reserve_resources+0x0/0xc4 @ 1 [ 1.531817] initcall acpi_reserve_resources+0x0/0xc4 returned 0 after 5 usecs [ 1.531822] calling bgrt_init+0x0/0x83 @ 1 [ 1.531828] initcall bgrt_init+0x0/0x83 returned -19 after 1 usecs [ 1.531832] calling erst_init+0x0/0x240 @ 1 [ 1.531840] initcall erst_init+0x0/0x240 returned 0 after 2 usecs [ 1.531844] calling pty_init+0x0/0x1db @ 1 [ 1.532223] initcall pty_init+0x0/0x1db returned 0 after 355 usecs [ 1.532233] calling sysrq_init+0x0/0x3e @ 1 [ 1.532254] initcall sysrq_init+0x0/0x3e returned 0 after 13 usecs [ 1.532259] calling serial8250_init+0x0/0x113 @ 1 [ 1.532264] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.552976] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.553284] serial 00:08: [io 0x02f8-0x02ff] [ 1.553430] serial 00:08: [irq 5] [ 1.554284] serial 00:08: activated [ 1.574814] 00:08: ttyS1 at I/O 0x2f8 (irq = 5) is a 16550A [ 1.576212] initcall serial8250_init+0x0/0x113 returned 0 after 42908 usecs [ 1.576222] calling serial_pci_driver_init+0x0/0x11 @ 1 [ 1.576400] initcall serial_pci_driver_init+0x0/0x11 returned 0 after 167 usecs [ 1.576408] calling rand_initialize+0x0/0x21 @ 1 [ 1.576446] initcall rand_initialize+0x0/0x21 returned 0 after 31 usecs [ 1.576451] calling hpet_init+0x0/0x53 @ 1 [ 1.576872] initcall hpet_init+0x0/0x53 returned 0 after 396 usecs [ 1.576882] calling agp_init+0x0/0x24 @ 1 [ 1.576887] Linux agpgart interface v0.103 [ 1.576893] initcall agp_init+0x0/0x24 returned 0 after 4 usecs [ 1.576898] calling agp_amd64_mod_init+0x0/0x5 @ 1 [ 1.577026] initcall agp_amd64_mod_init+0x0/0x5 returned -19 after 118 usecs [ 1.577030] calling cn_proc_init+0x0/0x30 @ 1 [ 1.577039] initcall cn_proc_init+0x0/0x30 returned 0 after 3 usecs [ 1.577045] calling topology_sysfs_init+0x0/0x48 @ 1 [ 1.577070] initcall topology_sysfs_init+0x0/0x48 returned 0 after 19 usecs [ 1.577075] calling net_olddevs_init+0x0/0x4a @ 1 [ 1.577089] initcall net_olddevs_init+0x0/0x4a returned 0 after 8 usecs [ 1.577093] calling cxgb3_init_module+0x0/0x16 @ 1 [ 1.577128] initcall cxgb3_init_module+0x0/0x16 returned 0 after 27 usecs [ 1.577133] calling cxgb4_init_module+0x0/0x71 @ 1 [ 1.577437] initcall cxgb4_init_module+0x0/0x71 returned 0 after 216 usecs [ 1.577442] calling ehci_hcd_init+0x0/0x96 @ 1 [ 1.577447] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.577451] ehci_hcd: block sizes: qh 64 qtd 96 itd 160 sitd 96 [ 1.577461] initcall ehci_hcd_init+0x0/0x96 returned 0 after 11 usecs [ 1.577466] calling ehci_pci_init+0x0/0x59 @ 1 [ 1.577470] ehci-pci: EHCI PCI platform driver [ 1.577820] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.577835] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.577848] QUIRK: Enable AMD PLL fix [ 1.577853] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.577939] ehci-pci 0000:00:12.2: debug port 1 [ 1.577947] ehci-pci 0000:00:12.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5 [ 1.577954] ehci-pci 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.577986] ehci-pci 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.577999] ehci-pci 0000:00:12.2: MWI active [ 1.578003] ehci-pci 0000:00:12.2: supports USB remote wakeup [ 1.578036] ehci-pci 0000:00:12.2: irq 17, io mem 0xf014b400 [ 1.578046] ehci-pci 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.587096] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.587191] usb usb1: default language 0x0409 [ 1.587206] usb usb1: udev 1, busnum 1, minor = 0 [ 1.587212] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.587217] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.587221] usb usb1: Product: EHCI Host Controller [ 1.587226] usb usb1: Manufacturer: Linux 3.10.0+ ehci_hcd [ 1.587229] usb usb1: SerialNumber: 0000:00:12.2 [ 1.587667] usb usb1: usb_probe_device [ 1.587678] usb usb1: configuration #1 chosen from 1 choice [ 1.587703] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.587747] hub 1-0:1.0: usb_probe_interface [ 1.587753] hub 1-0:1.0: usb_probe_interface - got id [ 1.587760] hub 1-0:1.0: USB hub found [ 1.587770] hub 1-0:1.0: 5 ports detected [ 1.587774] hub 1-0:1.0: standalone hub [ 1.587778] hub 1-0:1.0: no power switching (usb 1.0) [ 1.587782] hub 1-0:1.0: individual port over-current protection [ 1.587786] hub 1-0:1.0: power on to power good time: 20ms [ 1.587794] hub 1-0:1.0: local power source is good [ 1.587913] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.588474] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.588490] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.588499] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.588587] ehci-pci 0000:00:13.2: debug port 1 [ 1.588595] ehci-pci 0000:00:13.2: reset hcs_params 0x101505 dbg=1 cc=1 pcc=5 ordered !ppc ports=5 [ 1.588602] ehci-pci 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.588634] ehci-pci 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.588647] ehci-pci 0000:00:13.2: MWI active [ 1.588651] ehci-pci 0000:00:13.2: supports USB remote wakeup [ 1.588668] ehci-pci 0000:00:13.2: irq 17, io mem 0xf014b500 [ 1.588677] ehci-pci 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.599092] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.599164] usb usb2: default language 0x0409 [ 1.599179] usb usb2: udev 1, busnum 2, minor = 128 [ 1.599185] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.599190] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.599194] usb usb2: Product: EHCI Host Controller [ 1.599199] usb usb2: Manufacturer: Linux 3.10.0+ ehci_hcd [ 1.599203] usb usb2: SerialNumber: 0000:00:13.2 [ 1.599650] usb usb2: usb_probe_device [ 1.599661] usb usb2: configuration #1 chosen from 1 choice [ 1.599686] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.599731] hub 2-0:1.0: usb_probe_interface [ 1.599737] hub 2-0:1.0: usb_probe_interface - got id [ 1.599744] hub 2-0:1.0: USB hub found [ 1.599755] hub 2-0:1.0: 5 ports detected [ 1.599759] hub 2-0:1.0: standalone hub [ 1.599762] hub 2-0:1.0: no power switching (usb 1.0) [ 1.599766] hub 2-0:1.0: individual port over-current protection [ 1.599770] hub 2-0:1.0: power on to power good time: 20ms [ 1.599778] hub 2-0:1.0: local power source is good [ 1.599899] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.600163] initcall ehci_pci_init+0x0/0x59 returned 0 after 22153 usecs [ 1.600169] calling ehci_platform_init+0x0/0x3e @ 1 [ 1.600174] ehci-platform: EHCI generic platform driver [ 1.600198] initcall ehci_platform_init+0x0/0x3e returned 0 after 21 usecs [ 1.600203] calling ohci_hcd_mod_init+0x0/0xb7 @ 1 [ 1.600207] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.600211] ohci_hcd: block sizes: ed 64 td 64 [ 1.600633] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.600647] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.600659] ohci_hcd 0000:00:12.0: enabled AMD prefetch quirk [ 1.600684] ohci_hcd 0000:00:12.0: created debug files [ 1.600688] ohci_hcd 0000:00:12.0: supports USB remote wakeup [ 1.600729] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0148000 [ 1.659069] ohci_hcd 0000:00:12.0: OHCI controller state [ 1.659128] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers, rh state running [ 1.659136] ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3 [ 1.659142] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0 [ 1.659148] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF [ 1.659155] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.659166] ohci_hcd 0000:00:12.0: hcca frame #0005 [ 1.659173] ohci_hcd 0000:00:12.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5) [ 1.659179] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.659184] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE [ 1.659191] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS [ 1.659198] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS [ 1.659204] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS [ 1.659210] ohci_hcd 0000:00:12.0: roothub.portstatus [3] 0x00000100 PPS [ 1.659216] ohci_hcd 0000:00:12.0: roothub.portstatus [4] 0x00000100 PPS [ 1.659250] usb usb3: default language 0x0409 [ 1.659264] usb usb3: udev 1, busnum 3, minor = 256 [ 1.659269] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.659274] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.659279] usb usb3: Product: OHCI Host Controller [ 1.659283] usb usb3: Manufacturer: Linux 3.10.0+ ohci_hcd [ 1.659286] usb usb3: SerialNumber: 0000:00:12.0 [ 1.659735] usb usb3: usb_probe_device [ 1.659746] usb usb3: configuration #1 chosen from 1 choice [ 1.659771] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.659817] hub 3-0:1.0: usb_probe_interface [ 1.659823] hub 3-0:1.0: usb_probe_interface - got id [ 1.659830] hub 3-0:1.0: USB hub found [ 1.659915] hub 3-0:1.0: 5 ports detected [ 1.659919] hub 3-0:1.0: standalone hub [ 1.659923] hub 3-0:1.0: no power switching (usb 1.0) [ 1.659927] hub 3-0:1.0: global over-current protection [ 1.659931] hub 3-0:1.0: power on to power good time: 4ms [ 1.659940] hub 3-0:1.0: local power source is good [ 1.659944] hub 3-0:1.0: no over-current condition exists [ 1.660060] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.660153] ohci_hcd 0000:00:12.0: FS/LS companion for 0000:00:12.2 [ 1.660486] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.660499] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 1.660510] ohci_hcd 0000:00:13.0: enabled AMD prefetch quirk [ 1.660554] ohci_hcd 0000:00:13.0: created debug files [ 1.660558] ohci_hcd 0000:00:13.0: supports USB remote wakeup [ 1.660575] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0149000 [ 1.687104] ehci-pci 0000:00:12.2: GetStatus port:1 status 001403 0 ACK POWER sig=k CSC CONNECT [ 1.687120] hub 1-0:1.0: port 1: status 0501 change 0001 [ 1.687134] ehci-pci 0000:00:12.2: GetStatus port:2 status 001403 0 ACK POWER sig=k CSC CONNECT [ 1.687140] hub 1-0:1.0: port 2: status 0501 change 0001 [ 1.699159] hub 2-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 1.699514] hub 2-0:1.0: hub_suspend [ 1.699533] usb usb2: bus auto-suspend, wakeup 1 [ 1.699538] ehci-pci 0000:00:13.2: suspend root hub [ 1.719066] ohci_hcd 0000:00:13.0: OHCI controller state [ 1.719124] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers, rh state running [ 1.719132] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3 [ 1.719139] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 [ 1.719145] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF [ 1.719151] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.719163] ohci_hcd 0000:00:13.0: hcca frame #0005 [ 1.719169] ohci_hcd 0000:00:13.0: roothub.a 02000205 POTPGT=2 NPS NDP=5(5) [ 1.719175] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.719180] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE [ 1.719187] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS [ 1.719194] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS [ 1.719200] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS [ 1.719206] ohci_hcd 0000:00:13.0: roothub.portstatus [3] 0x00000100 PPS [ 1.719212] ohci_hcd 0000:00:13.0: roothub.portstatus [4] 0x00000100 PPS [ 1.719254] usb usb4: default language 0x0409 [ 1.719268] usb usb4: udev 1, busnum 4, minor = 384 [ 1.719273] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.719278] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.719282] usb usb4: Product: OHCI Host Controller [ 1.719286] usb usb4: Manufacturer: Linux 3.10.0+ ohci_hcd [ 1.719290] usb usb4: SerialNumber: 0000:00:13.0 [ 1.719752] usb usb4: usb_probe_device [ 1.719763] usb usb4: configuration #1 chosen from 1 choice [ 1.719788] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.719836] hub 4-0:1.0: usb_probe_interface [ 1.719841] hub 4-0:1.0: usb_probe_interface - got id [ 1.719848] hub 4-0:1.0: USB hub found [ 1.719930] hub 4-0:1.0: 5 ports detected [ 1.719934] hub 4-0:1.0: standalone hub [ 1.719938] hub 4-0:1.0: no power switching (usb 1.0) [ 1.719942] hub 4-0:1.0: global over-current protection [ 1.719946] hub 4-0:1.0: power on to power good time: 4ms [ 1.719955] hub 4-0:1.0: local power source is good [ 1.719959] hub 4-0:1.0: no over-current condition exists [ 1.720079] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.720173] ohci_hcd 0000:00:13.0: FS/LS companion for 0000:00:13.2 [ 1.720505] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.720521] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5 [ 1.720534] ohci_hcd 0000:00:14.5: enabled AMD prefetch quirk [ 1.720573] ohci_hcd 0000:00:14.5: created debug files [ 1.720577] ohci_hcd 0000:00:14.5: supports USB remote wakeup [ 1.720594] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf014a000 [ 1.759201] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 1.759247] hub 3-0:1.0: hub_suspend [ 1.759261] usb usb3: bus auto-suspend, wakeup 1 [ 1.759337] ohci_hcd 0000:00:12.0: suspend root hub [ 1.779063] ohci_hcd 0000:00:14.5: OHCI controller state [ 1.779122] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers, rh state running [ 1.779130] ohci_hcd 0000:00:14.5: control 0x283 RWC HCFS=operational CBSR=3 [ 1.779136] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0 [ 1.779143] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF [ 1.779149] ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.779160] ohci_hcd 0000:00:14.5: hcca frame #0005 [ 1.779167] ohci_hcd 0000:00:14.5: roothub.a 02000202 POTPGT=2 NPS NDP=2(2) [ 1.779173] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.779178] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE [ 1.779185] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS [ 1.779191] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS [ 1.779227] usb usb5: default language 0x0409 [ 1.779241] usb usb5: udev 1, busnum 5, minor = 512 [ 1.779246] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.779251] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.779255] usb usb5: Product: OHCI Host Controller [ 1.779259] usb usb5: Manufacturer: Linux 3.10.0+ ohci_hcd [ 1.779263] usb usb5: SerialNumber: 0000:00:14.5 [ 1.779740] usb usb5: usb_probe_device [ 1.779751] usb usb5: configuration #1 chosen from 1 choice [ 1.779775] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.779821] hub 5-0:1.0: usb_probe_interface [ 1.779826] hub 5-0:1.0: usb_probe_interface - got id [ 1.779833] hub 5-0:1.0: USB hub found [ 1.779914] hub 5-0:1.0: 2 ports detected [ 1.779919] hub 5-0:1.0: standalone hub [ 1.779922] hub 5-0:1.0: no power switching (usb 1.0) [ 1.779926] hub 5-0:1.0: global over-current protection [ 1.779930] hub 5-0:1.0: power on to power good time: 4ms [ 1.779939] hub 5-0:1.0: local power source is good [ 1.779943] hub 5-0:1.0: no over-current condition exists [ 1.779994] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.780125] initcall ohci_hcd_mod_init+0x0/0xb7 returned 0 after 175692 usecs [ 1.780131] calling uhci_hcd_init+0x0/0xf7 @ 1 [ 1.780135] uhci_hcd: USB Universal Host Controller Interface driver [ 1.780305] initcall uhci_hcd_init+0x0/0xf7 returned 0 after 162 usecs [ 1.780310] calling xhci_hcd_init+0x0/0x23 @ 1 [ 1.780338] initcall xhci_hcd_init+0x0/0x23 returned 0 after 21 usecs [ 1.780343] calling i8042_init+0x0/0x378 @ 1 [ 1.780421] i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.784127] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.784147] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.784258] initcall i8042_init+0x0/0x378 returned 0 after 3812 usecs [ 1.784265] calling mousedev_init+0x0/0x75 @ 1 [ 1.784988] mousedev: PS/2 mouse device common for all mice [ 1.785073] initcall mousedev_init+0x0/0x75 returned 0 after 777 usecs [ 1.785079] calling atkbd_init+0x0/0x1b @ 1 [ 1.785129] initcall atkbd_init+0x0/0x1b returned 0 after 42 usecs [ 1.785134] calling cmos_init+0x0/0x5c @ 1 [ 1.785195] rtc_cmos 00:00: RTC can wake from S4 [ 1.785607] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 1.785723] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs [ 1.785760] initcall cmos_init+0x0/0x5c returned 0 after 599 usecs [ 1.785766] calling init_ladder+0x0/0xa @ 1 [ 1.785772] cpuidle: using governor ladder [ 1.785778] initcall init_ladder+0x0/0xa returned 0 after 5 usecs [ 1.785783] calling init_menu+0x0/0xa @ 1 [ 1.785787] cpuidle: using governor menu [ 1.785792] initcall init_menu+0x0/0xa returned 0 after 3 usecs [ 1.785797] calling hid_init+0x0/0x43 @ 1 [ 1.785841] initcall hid_init+0x0/0x43 returned 0 after 35 usecs [ 1.785846] calling hid_generic_init+0x0/0x11 @ 1 [ 1.785868] initcall hid_generic_init+0x0/0x11 returned 0 after 15 usecs [ 1.785872] calling a4_driver_init+0x0/0x11 @ 1 [ 1.785889] initcall a4_driver_init+0x0/0x11 returned 0 after 10 usecs [ 1.785894] calling apple_driver_init+0x0/0x11 @ 1 [ 1.785920] initcall apple_driver_init+0x0/0x11 returned 0 after 19 usecs [ 1.785925] calling belkin_driver_init+0x0/0x11 @ 1 [ 1.785942] initcall belkin_driver_init+0x0/0x11 returned 0 after 10 usecs [ 1.785947] calling ch_driver_init+0x0/0x11 @ 1 [ 1.785964] initcall ch_driver_init+0x0/0x11 returned 0 after 10 usecs [ 1.785968] calling ch_driver_init+0x0/0x11 @ 1 [ 1.785985] initcall ch_driver_init+0x0/0x11 returned 0 after 10 usecs [ 1.785990] calling cp_driver_init+0x0/0x11 @ 1 [ 1.786006] initcall cp_driver_init+0x0/0x11 returned 0 after 10 usecs [ 1.786011] calling ez_driver_init+0x0/0x11 @ 1 [ 1.786027] initcall ez_driver_init+0x0/0x11 returned 0 after 10 usecs [ 1.786032] calling ks_driver_init+0x0/0x11 @ 1 [ 1.786053] initcall ks_driver_init+0x0/0x11 returned 0 after 14 usecs [ 1.786057] calling lg_driver_init+0x0/0x11 @ 1 [ 1.786074] initcall lg_driver_init+0x0/0x11 returned 0 after 10 usecs [ 1.786079] calling ms_driver_init+0x0/0x11 @ 1 [ 1.786095] initcall ms_driver_init+0x0/0x11 returned 0 after 10 usecs [ 1.786100] calling mr_driver_init+0x0/0x11 @ 1 [ 1.786117] initcall mr_driver_init+0x0/0x11 returned 0 after 10 usecs [ 1.786121] calling sock_diag_init+0x0/0xa @ 1 [ 1.786141] initcall sock_diag_init+0x0/0xa returned 0 after 13 usecs [ 1.786145] calling flow_cache_init_global+0x0/0x14f @ 1 [ 1.786293] initcall flow_cache_init_global+0x0/0x14f returned 0 after 137 usecs [ 1.786297] calling init_net_drop_monitor+0x0/0xd7 @ 1 [ 1.786301] drop_monitor: Initializing network drop monitor service [ 1.786329] initcall init_net_drop_monitor+0x0/0xd7 returned 0 after 24 usecs [ 1.786333] calling blackhole_module_init+0x0/0xa @ 1 [ 1.786340] initcall blackhole_module_init+0x0/0xa returned 0 after 1 usecs [ 1.786344] calling init_cgroup_cls+0x0/0x2f @ 1 [ 1.786351] initcall init_cgroup_cls+0x0/0x2f returned 0 after 2 usecs [ 1.786356] calling sysctl_ipv4_init+0x0/0x6d @ 1 [ 1.786495] initcall sysctl_ipv4_init+0x0/0x6d returned 0 after 129 usecs [ 1.786499] calling init_syncookies+0x0/0x12 @ 1 [ 1.786542] initcall init_syncookies+0x0/0x12 returned 0 after 37 usecs [ 1.786546] calling ipv4_netfilter_init+0x0/0xa @ 1 [ 1.786554] initcall ipv4_netfilter_init+0x0/0xa returned 0 after 1 usecs [ 1.786558] calling cubictcp_register+0x0/0x78 @ 1 [ 1.786562] TCP: cubic registered [ 1.786568] initcall cubictcp_register+0x0/0x78 returned 0 after 4 usecs [ 1.786572] calling inet6_init+0x0/0x29d @ 1 [ 1.786671] NET: Registered protocol family 10 [ 1.786908] hub 1-0:1.0: state 7 ports 5 chg 0006 evt 0000 [ 1.786994] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.787009] ehci-pci 0000:00:12.2: port 1 low speed --> companion [ 1.787127] usb usb3: usb wakeup-resume [ 1.787139] usb usb3: usb auto-resume [ 1.787355] initcall inet6_init+0x0/0x29d returned 0 after 758 usecs [ 1.787360] calling mip6_init+0x0/0xa0 @ 1 [ 1.787363] mip6: Mobile IPv6 [ 1.787370] initcall mip6_init+0x0/0xa0 returned 0 after 3 usecs [ 1.787374] calling packet_init+0x0/0x35 @ 1 [ 1.787378] NET: Registered protocol family 17 [ 1.787388] initcall packet_init+0x0/0x35 returned 0 after 8 usecs [ 1.787392] calling dcbnl_init+0x0/0x48 @ 1 [ 1.787399] initcall dcbnl_init+0x0/0x48 returned 0 after 1 usecs [ 1.787403] calling init_dns_resolver+0x0/0xbe @ 1 [ 1.787420] Key type dns_resolver registered [ 1.787426] initcall init_dns_resolver+0x0/0xbe returned 0 after 17 usecs [ 1.787432] calling mcheck_init_device+0x0/0xd1 @ 1 [ 1.787956] initcall mcheck_init_device+0x0/0xd1 returned 0 after 497 usecs [ 1.788058] calling mcheck_debugfs_init+0x0/0x35 @ 1 [ 1.788151] initcall mcheck_debugfs_init+0x0/0x35 returned 0 after 28 usecs [ 1.788156] calling severities_debugfs_init+0x0/0x37 @ 1 [ 1.788167] initcall severities_debugfs_init+0x0/0x37 returned 0 after 4 usecs [ 1.788172] calling threshold_init_device+0x0/0x3b @ 1 [ 1.788181] initcall threshold_init_device+0x0/0x3b returned 0 after 2 usecs [ 1.788185] calling hpet_insert_resource+0x0/0x1a @ 1 [ 1.788195] initcall hpet_insert_resource+0x0/0x1a returned 0 after 4 usecs [ 1.788200] calling update_mp_table+0x0/0x3b7 @ 1 [ 1.788206] initcall update_mp_table+0x0/0x3b7 returned 0 after 1 usecs [ 1.788210] calling lapic_insert_resource+0x0/0x2e @ 1 [ 1.788217] initcall lapic_insert_resource+0x0/0x2e returned 0 after 1 usecs [ 1.788221] calling io_apic_bug_finalize+0x0/0x16 @ 1 [ 1.788227] initcall io_apic_bug_finalize+0x0/0x16 returned 0 after 0 usecs [ 1.788231] calling print_ICs+0x0/0x395 @ 1 [ 1.788238] initcall print_ICs+0x0/0x395 returned 0 after 1 usecs [ 1.788242] calling print_ipi_mode+0x0/0x28 @ 1 [ 1.788245] Using IPI No-Shortcut mode [ 1.788251] initcall print_ipi_mode+0x0/0x28 returned 0 after 3 usecs [ 1.788255] calling check_early_ioremap_leak+0x0/0x47 @ 1 [ 1.788262] initcall check_early_ioremap_leak+0x0/0x47 returned 0 after 0 usecs [ 1.788266] calling pat_memtype_list_init+0x0/0x31 @ 1 [ 1.788277] initcall pat_memtype_list_init+0x0/0x31 returned 0 after 4 usecs [ 1.788282] calling init_oops_id+0x0/0x36 @ 1 [ 1.788299] initcall init_oops_id+0x0/0x36 returned 0 after 11 usecs [ 1.788304] calling printk_late_init+0x0/0x4d @ 1 [ 1.788313] initcall printk_late_init+0x0/0x4d returned 0 after 2 usecs [ 1.788317] calling sched_init_debug+0x0/0x21 @ 1 [ 1.788331] initcall sched_init_debug+0x0/0x21 returned 0 after 8 usecs [ 1.788335] calling pm_qos_power_init+0x0/0x55 @ 1 [ 1.789415] initcall pm_qos_power_init+0x0/0x55 returned 0 after 1041 usecs [ 1.789425] calling pm_debugfs_init+0x0/0x21 @ 1 [ 1.789450] initcall pm_debugfs_init+0x0/0x21 returned 0 after 18 usecs [ 1.789456] calling software_resume+0x0/0x242 @ 1 [ 1.789461] PM: Hibernation image not present or could not be loaded. [ 1.789467] initcall software_resume+0x0/0x242 returned -2 after 4 usecs [ 1.789473] calling debugfs_kprobe_init+0x0/0x71 @ 1 [ 1.789487] initcall debugfs_kprobe_init+0x0/0x71 returned 0 after 8 usecs [ 1.789492] calling taskstats_init+0x0/0x7d @ 1 [ 1.789517] registered taskstats version 1 [ 1.789523] initcall taskstats_init+0x0/0x7d returned 0 after 24 usecs [ 1.789527] calling clear_boot_tracer+0x0/0x2a @ 1 [ 1.789534] initcall clear_boot_tracer+0x0/0x2a returned 0 after 0 usecs [ 1.789539] calling max_swapfiles_check+0x0/0x3 @ 1 [ 1.789545] initcall max_swapfiles_check+0x0/0x3 returned 0 after 0 usecs [ 1.789550] calling set_recommended_min_free_kbytes+0x0/0x5c @ 1 [ 1.789800] initcall set_recommended_min_free_kbytes+0x0/0x5c returned 0 after 238 usecs [ 1.789806] calling prandom_reseed+0x0/0x80 @ 1 [ 1.789831] initcall prandom_reseed+0x0/0x80 returned 0 after 19 usecs [ 1.789836] calling pci_resource_alignment_sysfs_init+0x0/0x10 @ 1 [ 1.789846] initcall pci_resource_alignment_sysfs_init+0x0/0x10 returned 0 after 3 usecs [ 1.789850] calling pci_sysfs_init+0x0/0x3e @ 1 [ 1.790321] initcall pci_sysfs_init+0x0/0x3e returned 0 after 453 usecs [ 1.790326] calling regulator_init_complete+0x0/0xe0 @ 1 [ 1.790334] initcall regulator_init_complete+0x0/0xe0 returned 0 after 1 usecs [ 1.790338] calling random_int_secret_init+0x0/0x12 @ 1 [ 1.790361] initcall random_int_secret_init+0x0/0x12 returned 0 after 16 usecs [ 1.790366] calling deferred_probe_initcall+0x0/0x51 @ 1 [ 1.791071] initcall deferred_probe_initcall+0x0/0x51 returned 0 after 669 usecs [ 1.791085] calling rtc_hctosys+0x0/0xce @ 1 [ 1.791148] rtc_cmos 00:00: setting system clock to 2013-07-11 06:24:36 UTC (1373523876) [ 1.791156] initcall rtc_hctosys+0x0/0xce returned 0 after 63 usecs [ 1.791162] calling firmware_memmap_init+0x0/0x24 @ 1 [ 1.791286] initcall firmware_memmap_init+0x0/0x24 returned 0 after 114 usecs [ 1.791292] calling pci_mmcfg_late_insert_resources+0x0/0x3f @ 1 [ 1.791300] initcall pci_mmcfg_late_insert_resources+0x0/0x3f returned 0 after 1 usecs [ 1.791306] calling tcp_congestion_default+0x0/0xa @ 1 [ 1.791314] initcall tcp_congestion_default+0x0/0xa returned 0 after 2 usecs [ 1.791318] calling tcp_fastopen_init+0x0/0x3f @ 1 [ 1.791345] initcall tcp_fastopen_init+0x0/0x3f returned 0 after 21 usecs [ 1.791349] calling initialize_hashrnd+0x0/0x12 @ 1 [ 1.791359] initcall initialize_hashrnd+0x0/0x12 returned 0 after 3 usecs [ 1.791453] async_waiting @ 1 [ 1.791528] async_continuing @ 1 after 1 usec [ 1.791554] Freeing unused kernel memory: 400k freed [ 1.792126] Write protecting the kernel text: 3084k [ 1.792245] Write protecting the kernel read-only data: 1212k [ 1.798842] ohci_hcd 0000:00:12.0: wakeup root hub [ 1.842919] ehci-pci 0000:00:12.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 1.842961] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 1.842977] ehci-pci 0000:00:12.2: port 2 low speed --> companion [ 1.862911] hub 3-0:1.0: hub_resume [ 1.862933] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS [ 1.862943] hub 3-0:1.0: port 1: status 0301 change 0001 [ 1.862954] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS [ 1.862960] hub 3-0:1.0: port 2: status 0301 change 0001 [ 1.868317] calling sp5100_tco_init_module+0x0/0x1000 [sp5100_tco] @ 82 [ 1.868381] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 1.868481] sp5100_tco: PCI Revision ID: 0x42 [ 1.868597] sp5100_tco: Using 0xfed80b00 for watchdog MMIO address [ 1.868611] sp5100_tco: Last reboot was not triggered by watchdog. [ 1.874117] calling init_scsi+0x0/0x7e [scsi_mod] @ 78 [ 1.874347] SCSI subsystem initialized [ 1.874445] initcall init_scsi+0x0/0x7e [scsi_mod] returned 0 after 253 usecs [ 1.877955] calling ata_init+0x0/0x275 [libata] @ 78 [ 1.877968] ACPI: bus type ATA registered [ 1.878005] libata version 3.00 loaded. [ 1.878099] initcall ata_init+0x0/0x275 [libata] returned 0 after 110 usecs [ 1.883771] sp5100_tco: initialized (0xf82a8b00). heartbeat=60 sec (nowayout=0) [ 1.883873] initcall sp5100_tco_init_module+0x0/0x1000 [sp5100_tco] returned 0 after 15119 usecs [ 1.898840] ehci-pci 0000:00:12.2: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 1.898887] hub 1-0:1.0: state 7 ports 5 chg 0000 evt 0006 [ 1.898899] ehci-pci 0000:00:12.2: GetStatus port:1 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 1.898911] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s [ 1.906036] calling thermal_init+0x0/0x1000 [thermal_sys] @ 107 [ 1.906154] initcall thermal_init+0x0/0x1000 [thermal_sys] returned 0 after 31 usecs [ 1.918426] calling ahci_pci_driver_init+0x0/0x1000 [ahci] @ 78 [ 1.918540] ahci 0000:00:11.0: version 3.0 [ 1.924386] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 1.924398] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part [ 1.926695] calling acpi_thermal_init+0x0/0x1000 [thermal] @ 107 [ 1.928973] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.928979] ACPI: Thermal Zone [TZ00] (40 C) [ 1.932176] initcall acpi_thermal_init+0x0/0x1000 [thermal] returned 0 after 5207 usecs [ 1.934391] scsi0 : ahci [ 1.939567] scsi1 : ahci [ 1.940295] scsi2 : ahci [ 1.940440] scsi3 : ahci [ 1.940575] scsi4 : ahci [ 1.940779] scsi5 : ahci [ 1.940937] ata1: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b100 irq 19 [ 1.940944] ata2: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b180 irq 19 [ 1.940949] ata3: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b200 irq 19 [ 1.940954] ata4: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b280 irq 19 [ 1.940959] ata5: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b300 irq 19 [ 1.940964] ata6: SATA max UDMA/133 abar m1024@0xf014b000 port 0xf014b380 irq 19 [ 1.941265] initcall ahci_pci_driver_init+0x0/0x1000 [ahci] returned 0 after 22210 usecs [ 1.964728] calling acpi_fan_driver_init+0x0/0x1000 [fan] @ 153 [ 1.964997] ACPI: Fan [FAN0] (on) [ 1.965083] initcall acpi_fan_driver_init+0x0/0x1000 [fan] returned 0 after 265 usecs [ 1.969563] calling rtl8169_pci_driver_init+0x0/0x1000 [r8169] @ 157 [ 1.969674] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.970175] r8169 0000:03:00.0: irq 42 for MSI/MSI-X [ 1.979392] r8169 0000:03:00.0 eth0: RTL8168e/8111e at 0xf8032000, 00:25:22:f8:1f:c8, XID 0c200000 IRQ 42 [ 1.979401] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.980938] initcall rtl8169_pci_driver_init+0x0/0x1000 [r8169] returned 0 after 11017 usecs [ 2.026858] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [ 2.026876] ehci-pci 0000:00:12.2: GetStatus port:2 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 2.026888] hub 1-0:1.0: port 2, status 0100, change 0001, 12 Mb/s [ 2.155091] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 [ 2.155120] hub 4-0:1.0: state 7 ports 5 chg 0000 evt 0000 [ 2.155129] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.155136] hub 3-0:1.0: state 7 ports 5 chg 0006 evt 0000 [ 2.155218] hub 3-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s [ 2.155277] hub 1-0:1.0: hub_suspend [ 2.155289] usb usb1: bus auto-suspend, wakeup 1 [ 2.155294] ehci-pci 0000:00:12.2: suspend root hub [ 2.155980] hub 4-0:1.0: hub_suspend [ 2.155986] usb usb4: bus auto-suspend, wakeup 1 [ 2.155992] ohci_hcd 0000:00:13.0: suspend root hub [ 2.156012] hub 5-0:1.0: hub_suspend [ 2.156017] usb usb5: bus auto-suspend, wakeup 1 [ 2.156023] ohci_hcd 0000:00:14.5: suspend root hub [ 2.182166] ohci_hcd 0000:00:12.0: port[0] reset timeout, stat 00000311 [ 2.235136] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS [ 2.259143] ata1: SATA link down (SStatus 0 SControl 300) [ 2.263141] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.263191] ata2: SATA link down (SStatus 0 SControl 300) [ 2.267151] ata4: SATA link down (SStatus 0 SControl 300) [ 2.267201] ata6: SATA link down (SStatus 0 SControl 300) [ 2.267242] ata5: SATA link down (SStatus 0 SControl 300) [ 2.269502] ata3.00: ATA-8: WDC WD20EARS-60MVWB0, 51.0AB51, max UDMA/100 [ 2.269511] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.276519] ata3.00: configured for UDMA/100 [ 2.277226] scsi 2:0:0:0: Direct-Access ATA WDC WD20EARS-60M 51.0 PQ: 0 ANSI: 5 [ 2.290240] calling init_sd+0x0/0x1000 [sd_mod] @ 174 [ 2.290657] sd 2:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 2.290663] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 2.290810] sd 2:0:0:0: [sda] Write Protect is off [ 2.290816] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.290826] usb 3-1: new low-speed USB device number 2 using ohci_hcd [ 2.290875] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.291412] initcall init_sd+0x0/0x1000 [sd_mod] returned 0 after 1059 usecs [ 2.304742] sda: sda1 sda2 [ 2.306222] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.317887] ohci_hcd 0000:00:12.0: port[0] reset timeout, stat 00000313 [ 2.371128] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS [ 2.455296] usb 3-1: skipped 1 descriptor after interface [ 2.457279] usb 3-1: default language 0x0409 [ 2.464299] usb 3-1: udev 2, busnum 3, minor = 257 [ 2.464309] usb 3-1: New USB device found, idVendor=046d, idProduct=c312 [ 2.464315] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.464320] usb 3-1: Product: USB Multimedia Keyboard [ 2.464324] usb 3-1: Manufacturer: LITEON Technology [ 2.464785] usb 3-1: usb_probe_device [ 2.464797] usb 3-1: configuration #1 chosen from 1 choice [ 2.466000] usb 3-1: adding 3-1:1.0 (config #1, interface 0) [ 2.466201] hub 3-0:1.0: port 2, status 0301, change 0000, 1.5 Mb/s [ 2.471368] calling hid_init+0x0/0x1000 [usbhid] @ 183 [ 2.471473] usbhid 3-1:1.0: usb_probe_interface [ 2.471480] usbhid 3-1:1.0: usb_probe_interface - got id [ 2.476861] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input0 [ 2.476892] hid-generic 0003:046D:C312.0001: input: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:12.0-1/input0 [ 2.476969] usbcore: registered new interface driver usbhid [ 2.476972] usbhid: USB HID core driver [ 2.476987] initcall hid_init+0x0/0x1000 [usbhid] returned 0 after 5402 usecs [ 2.486895] tsc: Refined TSC clocksource calibration: 1599.999 MHz [ 2.486909] Switching to clocksource tsc [ 2.489889] ohci_hcd 0000:00:12.0: port[1] reset timeout, stat 00000311 [ 2.510234] calling md_init+0x0/0x1000 [md_mod] @ 194 [ 2.510386] initcall md_init+0x0/0x1000 [md_mod] returned 0 after 124 usecs [ 2.528236] md: md0 stopped. [ 2.531048] md: bind<sda1> [ 2.534972] calling raid_init+0x0/0x1000 [raid1] @ 201 [ 2.534981] md: raid1 personality registered for level 1 [ 2.534989] initcall raid_init+0x0/0x1000 [raid1] returned 0 after 4 usecs [ 2.535951] md/raid1:md0: active with 1 out of 2 mirrors [ 2.536019] md0: detected capacity change from 0 to 509804544 [ 2.536857] RAID1 conf printout: [ 2.536864] --- wd:1 rd:2 [ 2.536869] disk 0, wo:0, o:1, dev:sda1 [ 2.539191] md0: unknown partition table [ 2.542929] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS [ 2.598824] usb 3-2: new low-speed USB device number 3 using ohci_hcd [ 2.599038] md: md1 stopped. [ 2.625598] ohci_hcd 0000:00:12.0: port[1] reset timeout, stat 00000313 [ 2.636117] md: bind<sda2> [ 2.638910] md/raid1:md1: active with 1 out of 2 mirrors [ 2.638959] md1: detected capacity change from 0 to 1999886286848 [ 2.639018] RAID1 conf printout: [ 2.639043] --- wd:1 rd:2 [ 2.639047] disk 0, wo:0, o:1, dev:sda2 [ 2.644192] md1: unknown partition table [ 2.652478] calling dm_init+0x0/0x2f [dm_mod] @ 215 [ 2.652516] device-mapper: uevent: version 1.0.3 [ 2.652638] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel(a)redhat.com [ 2.652658] initcall dm_init+0x0/0x2f [dm_mod] returned 0 after 152 usecs [ 2.678942] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS [ 2.724369] calling dm_crypt_init+0x0/0x1000 [dm_crypt] @ 223 [ 2.724395] initcall dm_crypt_init+0x0/0x1000 [dm_crypt] returned 0 after 12 usecs [ 2.765285] usb 3-2: skipped 1 descriptor after interface [ 2.765298] usb 3-2: udev 3, busnum 3, minor = 258 [ 2.765304] usb 3-2: New USB device found, idVendor=1241, idProduct=1122 [ 2.765309] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.765689] usb 3-2: usb_probe_device [ 2.765701] usb 3-2: configuration #1 chosen from 1 choice [ 2.767301] usb 3-2: adding 3-2:1.0 (config #1, interface 0) [ 2.767402] usbhid 3-2:1.0: usb_probe_interface [ 2.767409] usbhid 3-2:1.0: usb_probe_interface - got id [ 2.774639] input: HID 1241:1122 as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input1 [ 2.774765] hid-generic 0003:1241:1122.0002: input: USB HID v1.00 Mouse [HID 1241:1122] on usb-0000:00:12.0-2/input0 [ 2.774886] hub 3-0:1.0: state 7 ports 5 chg 0000 evt 0004 [ 21.729374] calling crypto_cbc_module_init+0x0/0x1000 [cbc] @ 241 [ 21.729389] initcall crypto_cbc_module_init+0x0/0x1000 [cbc] returned 0 after 1 usecs [ 21.739381] calling sha256_generic_mod_init+0x0/0x1000 [sha256_generic] @ 249 [ 21.739642] initcall sha256_generic_mod_init+0x0/0x1000 [sha256_generic] returned 0 after 240 usecs [ 21.742884] bio: create slab <bio-1> at 1 [ 21.827640] bio: create slab <bio-1> at 1 [ 23.215965] PM: Starting manual resume from disk [ 23.215974] PM: Hibernation image partition 253:2 present [ 23.215977] PM: Looking for hibernation image. [ 23.216917] PM: Image not found (code -22) [ 23.216924] PM: Hibernation image not present or could not be loaded. [ 23.224006] calling journal_init+0x0/0xd2e [jbd] @ 341 [ 23.224054] initcall journal_init+0x0/0xd2e [jbd] returned 0 after 27 usecs [ 23.225182] calling init_mbcache+0x0/0x1000 [mbcache] @ 341 [ 23.225196] initcall init_mbcache+0x0/0x1000 [mbcache] returned 0 after 1 usecs [ 23.235084] calling init_ext3_fs+0x0/0x6e [ext3] @ 341 [ 23.235175] initcall init_ext3_fs+0x0/0x6e [ext3] returned 0 after 62 usecs [ 23.253473] kjournald starting. Commit interval 5 seconds [ 23.253593] EXT3-fs (dm-1): mounted filesystem with ordered data mode [ 24.341390] SELinux: 2048 avtab hash slots, 62387 rules. [ 24.372223] SELinux: 2048 avtab hash slots, 62387 rules. [ 24.381600] SELinux: 6 users, 6 roles, 1820 types, 106 bools, 1 sens, 1024 cats [ 24.381609] SELinux: 83 classes, 62387 rules [ 24.387935] SELinux: Permission wake_alarm in class capability2 not defined in policy. [ 24.387943] SELinux: Permission block_suspend in class capability2 not defined in policy. [ 24.387955] SELinux: Permission attach_queue in class tun_socket not defined in policy. [ 24.387959] SELinux: the above unknown classes and permissions will be denied [ 24.387980] SELinux: Completing initialization. [ 24.387983] SELinux: Setting up existing superblocks. [ 24.388003] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 24.388015] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 24.388023] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 24.388037] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 24.388053] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 24.388075] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 24.388610] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 24.388991] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 24.388996] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 24.389007] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 24.389015] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 24.389036] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 24.389046] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 24.389058] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 24.389079] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 24.389544] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 24.389975] SELinux: initialized (dev dm-1, type ext3), uses xattr [ 24.390061] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 24.501735] type=1403 audit(1373523899.206:2): policy loaded auid=4294967295 ses=4294967295 [ 25.230544] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 26.174536] type=1400 audit(1373523900.878:3): avc: denied { block_suspend } for pid=512 comm="udevd" capability=36 scontext=system_u:system_r:kernel_t:s0 tcontext=system_u:system_r:kernel_t:s0 tclass=capability2 [ 26.586923] calling evdev_init+0x0/0x1000 [evdev] @ 602 [ 26.587587] calling serio_raw_drv_init+0x0/0x1000 [serio_raw] @ 578 [ 26.587632] initcall serio_raw_drv_init+0x0/0x1000 [serio_raw] returned 0 after 32 usecs [ 26.588465] initcall evdev_init+0x0/0x1000 [evdev] returned 0 after 1489 usecs [ 26.651491] calling psmouse_init+0x0/0x6b [psmouse] @ 577 [ 26.651886] initcall psmouse_init+0x0/0x6b [psmouse] returned 0 after 367 usecs [ 26.772830] calling init_soundcore+0x0/0x1000 [soundcore] @ 627 [ 26.772857] initcall init_soundcore+0x0/0x1000 [soundcore] returned 0 after 15 usecs [ 27.079281] calling acpi_button_driver_init+0x0/0x1000 [button] @ 619 [ 27.079449] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 27.079897] ACPI: Power Button [PWRB] [ 27.080037] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 27.080150] ACPI: Power Button [PWRF] [ 27.080257] initcall acpi_button_driver_init+0x0/0x1000 [button] returned 0 after 939 usecs [ 27.183923] calling alsa_sound_init+0x0/0x7d [snd] @ 663 [ 27.183974] initcall alsa_sound_init+0x0/0x7d [snd] returned 0 after 29 usecs [ 27.285975] calling alsa_timer_init+0x0/0x1000 [snd_timer] @ 674 [ 27.286086] initcall alsa_timer_init+0x0/0x1000 [snd_timer] returned 0 after 93 usecs [ 27.312641] calling alsa_seq_device_init+0x0/0x1000 [snd_seq_device] @ 676 [ 27.312662] initcall alsa_seq_device_init+0x0/0x1000 [snd_seq_device] returned 0 after 8 usecs [ 27.460941] calling alsa_seq_init+0x0/0x45 [snd_seq] @ 674 [ 27.462440] initcall alsa_seq_init+0x0/0x45 [snd_seq] returned 0 after 1440 usecs [ 27.481202] calling acpi_processor_init+0x0/0x1000 [processor] @ 606 [ 27.481366] ACPI: acpi_idle registered with cpuidle [ 27.496240] initcall acpi_processor_init+0x0/0x1000 [processor] returned 0 after 14657 usecs [ 27.535470] calling alsa_rawmidi_init+0x0/0x1000 [snd_rawmidi] @ 682 [ 27.535486] initcall alsa_rawmidi_init+0x0/0x1000 [snd_rawmidi] returned 0 after 2 usecs [ 27.597001] calling alsa_seq_midi_event_init+0x0/0x1000 [snd_seq_midi_event] @ 687 [ 27.597014] initcall alsa_seq_midi_event_init+0x0/0x1000 [snd_seq_midi_event] returned 0 after 0 usecs [ 27.603705] calling alsa_seq_midi_init+0x0/0x1000 [snd_seq_midi] @ 685 [ 27.603720] initcall alsa_seq_midi_init+0x0/0x1000 [snd_seq_midi] returned 0 after 3 usecs [ 27.643427] calling alsa_mpu401_uart_init+0x0/0x1000 [snd_mpu401_uart] @ 627 [ 27.643440] initcall alsa_mpu401_uart_init+0x0/0x1000 [snd_mpu401_uart] returned 0 after 0 usecs [ 27.670752] calling snd_mem_init+0x0/0x1000 [snd_page_alloc] @ 537 [ 27.670801] initcall snd_mem_init+0x0/0x1000 [snd_page_alloc] returned 0 after 11 usecs [ 27.688023] calling alsa_card_mpu401_init+0x0/0x1000 [snd_mpu401] @ 627 [ 27.688091] mpu401: probe of 00:0c failed with error -16 [ 27.688106] MPU-401 device not found or device busy [ 27.697721] initcall alsa_card_mpu401_init+0x0/0x1000 [snd_mpu401] returned -19 after 9452 usecs [ 27.744584] calling svm_init+0x0/0xdcf [kvm_amd] @ 593 [ 27.745067] kvm: Nested Virtualization enabled [ 27.745521] initcall svm_init+0x0/0xdcf [kvm_amd] returned 0 after 888 usecs [ 27.920976] calling alsa_pcm_init+0x0/0x1000 [snd_pcm] @ 537 [ 27.921007] initcall alsa_pcm_init+0x0/0x1000 [snd_pcm] returned 0 after 11 usecs [ 27.947313] calling drm_core_init+0x0/0x102 [drm] @ 515 [ 27.947421] [drm] Initialized drm 1.1.0 20060810 [ 27.947457] initcall drm_core_init+0x0/0x102 [drm] returned 0 after 66 usecs [ 27.949183] calling alsa_hwdep_init+0x0/0x1000 [snd_hwdep] @ 537 [ 27.949214] initcall alsa_hwdep_init+0x0/0x1000 [snd_hwdep] returned 0 after 18 usecs [ 28.048895] calling ttm_init+0x0/0x1000 [ttm] @ 515 [ 28.049379] initcall ttm_init+0x0/0x1000 [ttm] returned 0 after 445 usecs [ 28.222181] calling azx_driver_init+0x0/0xf16 [snd_hda_intel] @ 537 [ 28.222501] snd_hda_intel 0000:00:01.1: irq 43 for MSI/MSI-X [ 28.231784] input: HD-Audio Generic HDMI as /devices/pci0000:00/0000:00:01.1/sound/card0/input4 [ 28.234060] calling backlight_class_init+0x0/0x1000 [backlight] @ 515 [ 28.234088] initcall backlight_class_init+0x0/0x1000 [backlight] returned 0 after 15 usecs [ 28.265039] calling patch_realtek_init+0x0/0x1000 [snd_hda_codec_realtek] @ 706 [ 28.265055] initcall patch_realtek_init+0x0/0x1000 [snd_hda_codec_realtek] returned 0 after 1 usecs [ 28.266115] hda_codec: ALC892: SKU not ready 0x00000100 [ 28.269628] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5 [ 28.293581] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input6 [ 28.293928] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input7 [ 28.294205] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input8 [ 28.294475] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input9 [ 28.294749] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 [ 28.295094] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 [ 28.295365] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 [ 28.295634] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input13 [ 28.296606] initcall azx_driver_init+0x0/0xf16 [snd_hda_intel] returned 0 after 72652 usecs [ 29.059888] calling radeon_init+0x0/0xa1 [radeon] @ 515 [ 29.059896] [drm] radeon kernel modesetting enabled. [ 29.061004] [drm] initializing kernel modesetting (PALM 0x1002:0x9802 0x1002:0x9802). [ 29.061048] [drm] register mmio base: 0xF0100000 [ 29.061051] [drm] register mmio size: 262144 [ 29.061139] ATOM BIOS: AMD [ 29.061211] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used) [ 29.061218] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF [ 29.061221] [drm] Detected VRAM RAM=384M, BAR=256M [ 29.061225] [drm] RAM width 32bits DDR [ 29.061366] [TTM] Zone kernel: Available graphics memory: 438544 kiB [ 29.061370] [TTM] Zone highmem: Available graphics memory: 1622228 kiB [ 29.061372] [TTM] Initializing pool allocator [ 29.061445] [drm] radeon: 384M of VRAM memory ready [ 29.061449] [drm] radeon: 512M of GTT memory ready. [ 29.093798] radeon 0000:00:01.0: f5ebca00 unpin not necessary [ 29.359315] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xf8966118 [ 29.359327] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 29.361013] [drm] Loading PALM Microcode [ 29.414791] [drm] PCIE GART of 512M enabled (table at 0x0000000000040000). [ 29.415027] radeon 0000:00:01.0: WB enabled [ 29.415035] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffa1fc00 [ 29.415042] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000018000c0c and cpu addr 0xffa1fc0c [ 29.502778] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000177118 and cpu addr 0xf90b2118 [ 29.502784] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 29.502787] [drm] Driver supports precise vblank timestamp query. [ 29.502886] radeon 0000:00:01.0: irq 44 for MSI/MSI-X [ 29.502912] radeon 0000:00:01.0: radeon: using MSI. [ 29.502955] [drm] radeon: irq initialized. [ 29.519513] [drm] ring test on 0 succeeded in 1 usecs [ 29.519575] [drm] ring test on 3 succeeded in 1 usecs [ 30.556521] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 31.576825] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 32.597136] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 33.617510] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 34.637816] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 35.658127] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 36.678438] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 37.698743] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 38.719117] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 39.739428] [drm:r600_uvd_init] *ERROR* UVD not responding, trying to reset the VCPU!!! [ 39.767402] [drm:r600_uvd_init] *ERROR* UVD not responding, giving up!!! [ 39.794095] [drm:evergreen_startup] *ERROR* radeon: error initializing UVD (-1). [ 39.801937] [drm] ib test on ring 0 succeeded in 0 usecs [ 39.801975] [drm] ib test on ring 3 succeeded in 0 usecs [ 39.802497] [drm] Radeon Display Connectors [ 39.802500] [drm] Connector 0: [ 39.802503] [drm] HDMI-A-1 [ 39.802505] [drm] HPD1 [ 39.802510] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 39.802512] [drm] Encoders: [ 39.802515] [drm] DFP1: INTERNAL_UNIPHY [ 39.802517] [drm] Connector 1: [ 39.802520] [drm] HDMI-A-2 [ 39.802522] [drm] HPD2 [ 39.802526] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 39.802528] [drm] Encoders: [ 39.802531] [drm] DFP2: INTERNAL_UNIPHY [ 39.802533] [drm] Connector 2: [ 39.802536] [drm] VGA-1 [ 39.802539] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [ 39.802542] [drm] Encoders: [ 39.802544] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 39.802600] [drm] Internal thermal controller without fan control [ 39.802661] == power state 0 == [ 39.802664] ui class: none [ 39.802667] internal class: uvd_hd [ 39.802671] caps: [ 39.802674] uvd vclk: 40000 dclk: 30477 [ 39.802678] power level 0 sclk: 27827 vddc: 900 [ 39.802679] status: [ 39.802682] == power state 1 == [ 39.802684] ui class: none [ 39.802686] internal class: uvd [ 39.802688] caps: [ 39.802691] uvd vclk: 53334 dclk: 40000 [ 39.802694] power level 0 sclk: 49231 vddc: 975 [ 39.802696] status: [ 39.802698] == power state 2 == [ 39.802700] ui class: performance [ 39.802702] internal class: none [ 39.802704] caps: [ 39.802707] uvd vclk: 0 dclk: 0 [ 39.802710] power level 0 sclk: 27827 vddc: 900 [ 39.802712] power level 1 sclk: 49231 vddc: 975 [ 39.802714] status: [ 39.802716] == power state 3 == [ 39.802718] ui class: none [ 39.802720] internal class: boot [ 39.802723] caps: [ 39.802725] uvd vclk: 0 dclk: 0 [ 39.802728] power level 0 sclk: 20000 vddc: 975 [ 39.802730] status: c r b [ 39.802733] == power state 4 == [ 39.802735] ui class: none [ 39.802737] internal class: thermal [ 39.802740] caps: [ 39.802753] uvd vclk: 0 dclk: 0 [ 39.802756] power level 0 sclk: 20000 vddc: 900 [ 39.802758] status: [ 39.802762] [drm] Found smc ucode version: 0x00010601 [ 39.802876] switching from power state: [ 39.802878] ui class: none [ 39.802880] internal class: boot [ 39.802883] caps: [ 39.802885] uvd vclk: 0 dclk: 0 [ 39.802888] power level 0 sclk: 20000 vddc: 975 [ 39.802890] status: c b [ 39.802893] switching to power state: [ 39.802895] ui class: performance [ 39.802897] internal class: none [ 39.802900] caps: [ 39.802902] uvd vclk: 0 dclk: 0 [ 39.802905] power level 0 sclk: 27827 vddc: 900 [ 39.802908] power level 1 sclk: 49231 vddc: 975 [ 39.802909] status: r [ 39.802974] [drm] radeon: dpm initialized [ 39.802983] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 [ 39.802990] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 [ 39.802995] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000000 [ 39.803110] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-1] [ 39.804268] [drm:radeon_atombios_connected_scratch_regs], DFP1 disconnected [ 39.804273] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:13:HDMI-A-1] disconnected [ 39.804278] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] [ 39.805424] [drm:radeon_atombios_connected_scratch_regs], DFP2 disconnected [ 39.805427] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:15:HDMI-A-2] disconnected [ 39.805432] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:VGA-1] [ 39.839677] [drm:radeon_atombios_connected_scratch_regs], CRT1 connected [ 39.839760] [drm:drm_helper_probe_single_connector_modes], [CONNECTOR:17:VGA-1] probed modes : [ 39.839765] [drm:drm_mode_debug_printmodeline], Modeline 31:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 39.839772] [drm:drm_mode_debug_printmodeline], Modeline 19:"1280x1024" 60 108000 1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 39.839778] [drm:drm_mode_debug_printmodeline], Modeline 32:"1024x768" 75 78800 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 39.839784] [drm:drm_mode_debug_printmodeline], Modeline 23:"1024x768" 75 78750 1024 1040 1136 1312 768 769 772 800 0x40 0x5 [ 39.839790] [drm:drm_mode_debug_printmodeline], Modeline 33:"1024x768" 70 75000 1024 1048 1184 1328 768 771 777 806 0x40 0xa [ 39.839796] [drm:drm_mode_debug_printmodeline], Modeline 34:"1024x768" 60 65000 1024 1048 1184 1344 768 771 777 806 0x40 0xa [ 39.839802] [drm:drm_mode_debug_printmodeline], Modeline 35:"832x624" 75 57284 832 864 928 1152 624 625 628 667 0x40 0xa [ 39.839807] [drm:drm_mode_debug_printmodeline], Modeline 36:"800x600" 75 49500 800 816 896 1056 600 601 604 625 0x40 0x5 [ 39.839813] [drm:drm_mode_debug_printmodeline], Modeline 37:"800x600" 72 50000 800 856 976 1040 600 637 643 666 0x40 0x5 [ 39.839819] [drm:drm_mode_debug_printmodeline], Modeline 24:"800x600" 60 40000 800 840 968 1056 600 601 605 628 0x40 0x5 [ 39.839824] [drm:drm_mode_debug_printmodeline], Modeline 25:"800x600" 56 36000 800 824 896 1024 600 601 603 625 0x40 0x5 [ 39.839830] [drm:drm_mode_debug_printmodeline], Modeline 26:"640x480" 75 31500 640 656 720 840 480 481 484 500 0x40 0xa [ 39.839836] [drm:drm_mode_debug_printmodeline], Modeline 27:"640x480" 73 31500 640 664 704 832 480 489 491 520 0x40 0xa [ 39.839841] [drm:drm_mode_debug_printmodeline], Modeline 28:"640x480" 67 30240 640 704 768 864 480 483 486 525 0x40 0xa [ 39.839847] [drm:drm_mode_debug_printmodeline], Modeline 29:"640x480" 60 25200 640 656 752 800 480 490 492 525 0x40 0xa [ 39.839852] [drm:drm_mode_debug_printmodeline], Modeline 22:"720x405" 70 26483 720 736 808 896 405 406 409 422 0x0 0x6 [ 39.839858] [drm:drm_mode_debug_printmodeline], Modeline 30:"720x400" 70 28320 720 738 846 900 400 412 414 449 0x40 0x6 [ 39.839864] [drm:drm_mode_debug_printmodeline], Modeline 21:"640x400" 70 23354 640 656 720 800 400 401 404 417 0x0 0x6 [ 39.839869] [drm:drm_mode_debug_printmodeline], Modeline 20:"640x360" 70 20604 640 648 712 784 360 361 364 375 0x0 0x6 [ 39.839876] [drm:drm_setup_crtcs], [ 39.839881] [drm:drm_enable_connectors], connector 13 enabled? no [ 39.839885] [drm:drm_enable_connectors], connector 15 enabled? no [ 39.839888] [drm:drm_enable_connectors], connector 17 enabled? yes [ 39.839891] [drm:drm_target_preferred], looking for cmdline mode on connector 17 [ 39.839895] [drm:drm_target_preferred], looking for preferred mode on connector 17 [ 39.839899] [drm:drm_target_preferred], found mode 1280x1024 [ 39.839902] [drm:drm_setup_crtcs], picking CRTCs for 8192x8192 config [ 39.839908] [drm:drm_setup_crtcs], desired mode 1280x1024 set on crtc 10 [ 39.844284] [drm] fb mappable at 0xE0378000 [ 39.844289] [drm] vram apper at 0xE0000000 [ 39.844292] [drm] size 5242880 [ 39.844294] [drm] fb depth is 24 [ 39.844297] [drm] pitch is 5120 [ 39.844819] fbcon: radeondrmfb (fb0) is primary device [ 39.846715] [drm:drm_crtc_helper_set_config], [ 39.846719] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:39] #connectors=1 (x y) (0 0) [ 39.846733] [drm:drm_crtc_helper_set_config], crtc has no fb, full mode set [ 39.846736] [drm:drm_crtc_helper_set_config], modes are different, full mode set [ 39.846741] [drm:drm_mode_debug_printmodeline], Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [ 39.846783] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 39.846787] [drm:drm_crtc_helper_set_config], encoder changed, full mode switch [ 39.846789] [drm:drm_crtc_helper_set_config], crtc changed, full mode switch [ 39.846793] [drm:drm_crtc_helper_set_config], [CONNECTOR:17:VGA-1] to [CRTC:10] [ 39.846795] [drm:drm_crtc_helper_set_config], attempting to set mode from userspace [ 39.846801] [drm:drm_mode_debug_printmodeline], Modeline 38:"1280x1024" 75 135000 1280 1296 1440 1688 1024 1025 1028 1066 0x40 0x5 [ 39.846810] [drm:radeon_encoder_set_active_device], setting active device to 00000001 from 00000001 00000001 for encoder 4 [ 39.846829] [drm:drm_crtc_helper_set_mode], [CRTC:10] [ 39.846890] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 [ 39.846897] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 [ 39.846948] [drm:radeon_compute_pll_avivo], 13500, pll dividers - fb: 21.6 ref: 2, post 8 [ 39.863312] [drm:drm_crtc_helper_set_mode], [ENCODER:16:TV-16] set [MODE:38:1280x1024] [ 39.863318] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 3, devices 00000001, active_devices 00000001 [ 39.863386] [drm:dce4_crtc_load_lut], 0 [ 39.876707] [drm:radeon_atom_encoder_dpms], encoder dpms 21 to mode 0, devices 00000001, active_devices 00000001 [ 39.876722] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 [ 39.876729] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 [ 39.876746] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 39.876749] [drm:drm_crtc_helper_set_config], [CONNECTOR:17:VGA-1] set DPMS on [ 39.876754] [drm:drm_crtc_helper_set_config], [ 39.876757] [drm:drm_crtc_helper_set_config], [CRTC:11] [NOFB] [ 39.876760] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000008, active_devices 00000000 [ 39.876764] [drm:radeon_atom_encoder_dpms], encoder dpms 30 to mode 3, devices 00000080, active_devices 00000000 [ 39.876920] [drm:drm_crtc_helper_set_config], [ 39.876924] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:39] #connectors=1 (x y) (0 0) [ 39.876937] [drm:drm_crtc_helper_set_config], [CONNECTOR:17:VGA-1] to [CRTC:10] [ 39.876939] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 39.876942] [drm:drm_crtc_helper_set_config], [CONNECTOR:17:VGA-1] set DPMS on [ 39.876947] [drm:dce4_crtc_load_lut], 0 [ 39.876984] [drm:dce4_crtc_load_lut], 0 [ 39.889900] Console: switching to colour frame buffer device 160x64 [ 39.889908] [drm:drm_crtc_helper_set_config], [ 39.889911] [drm:drm_crtc_helper_set_config], [CRTC:10] [FB:39] #connectors=1 (x y) (0 0) [ 39.889918] [drm:drm_crtc_helper_set_config], [CONNECTOR:17:VGA-1] to [CRTC:10] [ 39.889921] [drm:drm_crtc_helper_set_config], Setting connector DPMS state to on [ 39.889923] [drm:drm_crtc_helper_set_config], [CONNECTOR:17:VGA-1] set DPMS on [ 39.889926] [drm:dce4_crtc_load_lut], 0 [ 39.889960] [drm:dce4_crtc_load_lut], 0 [ 39.902914] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device [ 39.902919] radeon 0000:00:01.0: registered panic notifier [ 39.902938] [drm:radeon_acpi_init], Call to ATCS verify_interface failed: -5 [ 39.902945] [drm:radeon_acpi_init], Call to ATIF verify_interface failed: -5 [ 39.902953] [drm] Initialized radeon 2.34.0 20080528 for 0000:00:01.0 on minor 0 [ 39.903223] initcall radeon_init+0x0/0xa1 [radeon] returned 0 after 10589131 usecs […] Are there other switches to increase the debugging level to get more information why exactly the startup fails? Thanks, Paul [1] http://lists.freedesktop.org/archives/dri-devel/2013-July/041213.html

3 2

[Bug 65723] New: Xonotic glsl 1.30 broken
by bugzilla-daemon＠freedesktop.org 11 Jul '13

11 Jul '13

https://bugs.freedesktop.org/show_bug.cgi?id=65723 Priority: medium Bug ID: 65723 Assignee: dri-devel(a)lists.freedesktop.org Summary: Xonotic glsl 1.30 broken Severity: blocker Classification: Unclassified OS: Linux (All) Reporter: jrch2k10(a)gmail.com Hardware: x86-64 (AMD64) Status: NEW Version: git Component: Drivers/Gallium/radeonsi Product: Mesa since glsl was enable by default xonotic 0.6 have heavy render issues my entire stack is git and my card is an 7770. you can download from here the entire apitrace file[apitrace 3.0] https://docs.google.com/uc?export=download&confirm=2qiw&id=0B29SlCylOCovb2N… thanks in advance -- You are receiving this mail because: You are the assignee for the bug.

1 8

[Bug 66558] New: RS690: 3D artifacts when playing SuperTuxKart
by bugzilla-daemon＠freedesktop.org 11 Jul '13

11 Jul '13

https://bugs.freedesktop.org/show_bug.cgi?id=66558 Priority: medium Bug ID: 66558 Assignee: dri-devel(a)lists.freedesktop.org Summary: RS690: 3D artifacts when playing SuperTuxKart Severity: normal Classification: Unclassified OS: Linux (All) Reporter: bjoern-beutel(a)arcor.de Hardware: x86-64 (AMD64) Status: NEW Version: git Component: Drivers/Gallium/r300 Product: Mesa Created attachment 81975 --> https://bugs.freedesktop.org/attachment.cgi?id=81975&action=edit Example of corruption in SuperTuxKart Using the 300g driver from Mesa 9.1, the SuperTuxKart game sometimes shows artifacts, as show in the attached example. -- You are receiving this mail because: You are the assignee for the bug.

1 7

[Bug 57381] Radeon HD6950: Resuming from hibernation fails sometimes
by bugzilla-daemon＠bugzilla.kernel.org 10 Jul '13

10 Jul '13

https://bugzilla.kernel.org/show_bug.cgi?id=57381 Harald Judt <h.judt(a)gmx.at> changed: What |Removed |Added ---------------------------------------------------------------------------- Kernel Version| |3.8.13 --- Comment #21 from Harald Judt <h.judt(a)gmx.at> --- It took me a while because it turned out the old cable was faulty after all, and I had to replace it. Now that I got a new one, I installed an initramfs with tuxonice userui and tried to reproduce. Unfortunately, I was not very successful in getting more information. Here are the last lines of the log. Sometimes when it hangs, only the 20%....80% line gets printed and nothing more. Sometimes, it goes like this: ... TuxOnIce: Image found.^M^J Using dev_t 8:9, returned by blk_lookup_fs_info.^M^J Console is 67x240.^M^J Freezing user space processes ... (elapsed 0.00 seconds) done.^M^J ...20%...40%...60%...80%^M^J usb usb3: root hub lost power or was reset^M^J usb usb6: root hub lost power or was reset^M^J bttv: 0: reset, reinitialize^M^J bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms)^M^J ehci-pci 0000:00:1d.0: setting latency timer to 64^M^J usb usb5: root hub lost power or was reset^M^J snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X^M^J snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X^M^J i8042 kbd 00:0a: System wakeup disabled by ACPI^M^J tg3 0000:04:00.0 eth0: Link is down^M^J serial 00:0b: activated^M^J ehci-pci 0000:00:1a.0: cache line size of 64 is not supported^M^J ehci-pci 0000:00:1d.0: cache line size of 64 is not supported^M^J bttv: PLL set ok^M^J This happens after tuxoniceui shows me "About to restore original kernel. Press SPACE to continue". I guess this output is not complete, and not everything gets printed to the serial console because the computer hard freezes before that. The lines are similar, but not always in that order. They also appear in dmesg when everything goes right, so they're nothing special. Any idea what else I could do? -- You are receiving this mail because: You are watching the assignee of the bug.

1 0

[PATCH 01/12] drivers/gpu/drm/tilcdc: don't use devm_pinctrl_get_select_default() in probe
by Wolfram Sang 10 Jul '13

10 Jul '13

Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for setting the default pins. Compile tested only. Acked-by: Linus Walleij <linus.walleij(a)linaro.org> (personally at LCE13) Signed-off-by: Wolfram Sang <wsa(a)the-dreams.de> --- drivers/gpu/drm/tilcdc/tilcdc_panel.c | 6 ------ drivers/gpu/drm/tilcdc/tilcdc_slave.c | 6 ------ drivers/gpu/drm/tilcdc/tilcdc_tfp410.c | 6 ------ 3 files changed, 18 deletions(-) diff --git a/drivers/gpu/drm/tilcdc/tilcdc_panel.c b/drivers/gpu/drm/tilcdc/tilcdc_panel.c index 86c6732..f0ff5f8 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_panel.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_panel.c @@ -16,7 +16,6 @@ */ #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/consumer.h> #include <linux/backlight.h> #include <video/display_timing.h> #include <video/of_display_timing.h> @@ -358,7 +357,6 @@ static int panel_probe(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; struct panel_module *panel_mod; struct tilcdc_module *mod; - struct pinctrl *pinctrl; int ret = -EINVAL; @@ -376,10 +374,6 @@ static int panel_probe(struct platform_device *pdev) tilcdc_module_init(mod, "panel", &panel_module_ops); - pinctrl = devm_pinctrl_get_select_default(&pdev->dev); - if (IS_ERR(pinctrl)) - dev_warn(&pdev->dev, "pins are not configured\n"); - panel_mod->timings = of_get_display_timings(node); if (!panel_mod->timings) { diff --git a/drivers/gpu/drm/tilcdc/tilcdc_slave.c b/drivers/gpu/drm/tilcdc/tilcdc_slave.c index dfffaf0..2bdbe5e 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_slave.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_slave.c @@ -18,7 +18,6 @@ #include <linux/i2c.h> #include <linux/of_i2c.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/consumer.h> #include <drm/drm_encoder_slave.h> #include "tilcdc_drv.h" @@ -296,7 +295,6 @@ static int slave_probe(struct platform_device *pdev) struct device_node *i2c_node; struct slave_module *slave_mod; struct tilcdc_module *mod; - struct pinctrl *pinctrl; uint32_t i2c_phandle; struct i2c_adapter *slavei2c; int ret = -EINVAL; @@ -342,10 +340,6 @@ static int slave_probe(struct platform_device *pdev) tilcdc_module_init(mod, "slave", &slave_module_ops); - pinctrl = devm_pinctrl_get_select_default(&pdev->dev); - if (IS_ERR(pinctrl)) - dev_warn(&pdev->dev, "pins are not configured\n"); - tilcdc_slave_probedefer(false); return 0; diff --git a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c index 925c7cd..a38be60 100644 --- a/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c +++ b/drivers/gpu/drm/tilcdc/tilcdc_tfp410.c @@ -20,7 +20,6 @@ #include <linux/gpio.h> #include <linux/of_gpio.h> #include <linux/pinctrl/pinmux.h> -#include <linux/pinctrl/consumer.h> #include "tilcdc_drv.h" @@ -327,7 +326,6 @@ static int tfp410_probe(struct platform_device *pdev) struct device_node *i2c_node; struct tfp410_module *tfp410_mod; struct tilcdc_module *mod; - struct pinctrl *pinctrl; uint32_t i2c_phandle; int ret = -EINVAL; @@ -345,10 +343,6 @@ static int tfp410_probe(struct platform_device *pdev) tilcdc_module_init(mod, "tfp410", &tfp410_module_ops); - pinctrl = devm_pinctrl_get_select_default(&pdev->dev); - if (IS_ERR(pinctrl)) - dev_warn(&pdev->dev, "pins are not configured\n"); - if (of_property_read_u32(node, "i2c", &i2c_phandle)) { dev_err(&pdev->dev, "could not get i2c bus phandle\n"); goto fail; -- 1.7.10.4

1 0

[PATCH 0/2] GEM CMA PRIME fixes for v3.11
by Laurent Pinchart 10 Jul '13

10 Jul '13

Hi Dave, These two patches fix compilation breakages in drm-next due to the removal of drm_gem_cma_dmabuf_import() and drm_gem_cma_dmabuf_export() without updating the existing users (I don't blame anyone here, the patch that removed those functions and the patches that made use of them were merged at the same time). Laurent Pinchart (2): drm/rcar-du: Use the GEM PRIME helpers drm/shmobile: Use the GEM PRIME helpers drivers/gpu/drm/rcar-du/rcar_du_drv.c | 9 +++++++-- drivers/gpu/drm/shmobile/shmob_drm_drv.c | 9 +++++++-- 2 files changed, 14 insertions(+), 4 deletions(-) -- Regards, Laurent Pinchart

2 3

[PATCH 1/3] drm/edid: Fix constness warning in drm_load_edid_firmware()
by Geert Uytterhoeven 10 Jul '13

10 Jul '13

drivers/gpu/drm/drm_edid_load.c: In function ‘drm_load_edid_firmware’: drivers/gpu/drm/drm_edid_load.c:245: warning: initialization discards qualifiers from pointer target type drm_get_connector_name() returns a "const char *", hence propagate the const where needed. Signed-off-by: Geert Uytterhoeven <geert(a)linux-m68k.org> --- drivers/gpu/drm/drm_edid_load.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_edid_load.c b/drivers/gpu/drm/drm_edid_load.c index a4f5ce1..2c2803f 100644 --- a/drivers/gpu/drm/drm_edid_load.c +++ b/drivers/gpu/drm/drm_edid_load.c @@ -134,7 +134,7 @@ static u8 generic_edid[GENERIC_EDIDS][128] = { }; static u8 *edid_load(struct drm_connector *connector, char *name, - char *connector_name) + const char *connector_name) { const struct firmware *fw; struct platform_device *pdev; @@ -242,7 +242,7 @@ out: int drm_load_edid_firmware(struct drm_connector *connector) { - char *connector_name = drm_get_connector_name(connector); + const char *connector_name = drm_get_connector_name(connector); char *edidname = edid_firmware, *last, *colon; int ret; struct edid *edid; -- 1.7.9.5

2 3

[Bug 66768] New: UVD decoding of MPEG2 streams doesn't work on CEDAR
by bugzilla-daemon＠freedesktop.org 10 Jul '13

10 Jul '13

https://bugs.freedesktop.org/show_bug.cgi?id=66768 Priority: medium Bug ID: 66768 Assignee: dri-devel(a)lists.freedesktop.org Summary: UVD decoding of MPEG2 streams doesn't work on CEDAR Severity: normal Classification: Unclassified OS: Linux (All) Reporter: johannes.hirte(a)fem.tu-ilmenau.de Hardware: x86-64 (AMD64) Status: NEW Version: DRI CVS Component: DRM/Radeon Product: DRI On my system with CEDAR graphics decoding mpeg2 streams with vdpau doesn't work. Only a black window is showed and mplayer2 says: Loading extension-related profile 'vo.vdpau' Playing Fucking_With_Fire-Live_Sao_Paulo.mpg. Detected file format: MPEG-PS (MPEG-2 Program Stream) (libavformat) [mpeg @ 0x7f014dcc1cc0]max_analyze_duration 5000000 reached at 5005000 [lavf] stream 0: video (mpeg2video), -vid 0 [lavf] stream 1: audio (ac3), -aid 0 [lavf] stream 2: audio (ac3), -aid 1 Load subtitles in . Forced video codec: ffmpeg12vdpau Selected video codec: MPEG-1/2 video (VDPAU acceleration) [libavcodec] Selected audio codec: ATSC A/52A (AC-3) [libavcodec] AUDIO: 48000 Hz, 2 ch, s16le, 448.0 kbit/29.17% (ratio: 56000->192000) AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... Unsupported PixelFormat xvmcidct (16) Unsupported PixelFormat xvmcmc (15) VIDEO: 720x480 29.970 fps 7500.0 kbps (937.5 kB/s) Aspect ratio is 1.78:1 - scaling to correct movie aspect. VO: [vdpau] 720x480 => 853x480 MPEG2 VDPAU acceleration [vdpau] Compositing window manager detected. Assuming timing info is inaccurate. On a SUMO based system this works correct. -- You are receiving this mail because: You are the assignee for the bug.

1 1

[Bug 66551] New: System hang when DPM enabled on rs780.
by bugzilla-daemon＠freedesktop.org 10 Jul '13

10 Jul '13

https://bugs.freedesktop.org/show_bug.cgi?id=66551 Priority: medium Bug ID: 66551 Assignee: dri-devel(a)lists.freedesktop.org Summary: System hang when DPM enabled on rs780. Severity: normal Classification: Unclassified OS: All Reporter: octoploid(a)yandex.com Hardware: Other Status: NEW Version: XOrg CVS Component: DRM/Radeon Product: DRI I've tested the new DPM code (git://people.freedesktop.org/~agd5f/linux drm-next-3.11) on my rs780. I can reproducible hang my system by just copy/pasting a big document under LibreOffice. During the hang the keyboard is unusable and the mouse pointer only moves noncontinuous and jerky. Hitting the reset button is the only remedy. By disabling DPM the problem goes away. Jul 3 15:31:22 x4 kernel: [drm] Initialized drm 1.1.0 20060810 Jul 3 15:31:22 x4 kernel: [drm] radeon kernel modesetting enabled. Jul 3 15:31:22 x4 kernel: [drm] initializing kernel modesetting (RS780 0x1002:0x9614 0x1043:0x834D). Jul 3 15:31:22 x4 kernel: [drm] register mmio base: 0xFBEE0000 Jul 3 15:31:22 x4 kernel: [drm] register mmio size: 65536 Jul 3 15:31:22 x4 kernel: ATOM BIOS: 113 Jul 3 15:31:22 x4 kernel: radeon 0000:01:05.0: VRAM: 128M 0x00000000C0000000 - 0x00000000C7FFFFFF (128M used) Jul 3 15:31:22 x4 kernel: radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF Jul 3 15:31:22 x4 kernel: [drm] Detected VRAM RAM=128M, BAR=128M Jul 3 15:31:22 x4 kernel: [drm] RAM width 32bits DDR Jul 3 15:31:22 x4 kernel: [TTM] Zone kernel: Available graphics memory: 4082344 kiB Jul 3 15:31:22 x4 kernel: [TTM] Zone dma32: Available graphics memory: 2097152 kiB Jul 3 15:31:22 x4 kernel: [TTM] Initializing pool allocator Jul 3 15:31:22 x4 kernel: [TTM] Initializing DMA pool allocator Jul 3 15:31:22 x4 kernel: [drm] radeon: 128M of VRAM memory ready Jul 3 15:31:22 x4 kernel: [drm] radeon: 512M of GTT memory ready. Jul 3 15:31:22 x4 kernel: [drm] GART: num cpu pages 131072, num gpu pages 131072 Jul 3 15:31:22 x4 kernel: [drm] Loading RS780 Microcode Jul 3 15:31:22 x4 kernel: [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). Jul 3 15:31:22 x4 kernel: radeon 0000:01:05.0: WB enabled Jul 3 15:31:22 x4 kernel: radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff880215c05c00 Jul 3 15:31:22 x4 kernel: radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff880215c05c0c Jul 3 15:31:22 x4 kernel: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). Jul 3 15:31:22 x4 kernel: [drm] Driver supports precise vblank timestamp query. Jul 3 15:31:22 x4 kernel: [drm] radeon: irq initialized. Jul 3 15:31:22 x4 kernel: radeon 0000:01:05.0: setting latency timer to 64 Jul 3 15:31:22 x4 kernel: [drm] ring test on 0 succeeded in 1 usecs Jul 3 15:31:22 x4 kernel: [drm] ring test on 3 succeeded in 1 usecs Jul 3 15:31:22 x4 kernel: [drm] ib test on ring 0 succeeded in 0 usecs Jul 3 15:31:22 x4 kernel: [drm] ib test on ring 3 succeeded in 0 usecs Jul 3 15:31:22 x4 kernel: [drm] Radeon Display Connectors Jul 3 15:31:22 x4 kernel: [drm] Connector 0: Jul 3 15:31:22 x4 kernel: [drm] VGA-1 Jul 3 15:31:22 x4 kernel: [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c Jul 3 15:31:22 x4 kernel: [drm] Encoders: Jul 3 15:31:22 x4 kernel: [drm] CRT1: INTERNAL_KLDSCP_DAC1 Jul 3 15:31:22 x4 kernel: [drm] Connector 1: Jul 3 15:31:22 x4 kernel: [drm] DVI-D-1 Jul 3 15:31:22 x4 kernel: [drm] HPD3 Jul 3 15:31:22 x4 kernel: [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c Jul 3 15:31:22 x4 kernel: [drm] Encoders: Jul 3 15:31:22 x4 kernel: [drm] DFP3: INTERNAL_KLDSCP_LVTMA Jul 3 15:31:22 x4 kernel: == power state 0 == Jul 3 15:31:22 x4 kernel: ui class: none Jul 3 15:31:22 x4 kernel: internal class: boot Jul 3 15:31:22 x4 kernel: caps: video Jul 3 15:31:22 x4 kernel: uvd vclk: 0 dclk: 0 Jul 3 15:31:22 x4 kernel: power level 0 sclk: 50000 vddc_index: 2 Jul 3 15:31:22 x4 kernel: power level 1 sclk: 50000 vddc_index: 2 Jul 3 15:31:22 x4 kernel: status: c r b Jul 3 15:31:22 x4 kernel: == power state 1 == Jul 3 15:31:22 x4 kernel: ui class: performance Jul 3 15:31:22 x4 kernel: internal class: none Jul 3 15:31:22 x4 kernel: caps: video Jul 3 15:31:22 x4 kernel: uvd vclk: 0 dclk: 0 Jul 3 15:31:22 x4 kernel: power level 0 sclk: 50000 vddc_index: 1 Jul 3 15:31:22 x4 kernel: power level 1 sclk: 70000 vddc_index: 2 Jul 3 15:31:22 x4 kernel: status: Jul 3 15:31:22 x4 kernel: == power state 2 == Jul 3 15:31:22 x4 kernel: ui class: none Jul 3 15:31:22 x4 kernel: internal class: uvd Jul 3 15:31:22 x4 kernel: caps: video Jul 3 15:31:22 x4 kernel: uvd vclk: 53300 dclk: 40000 Jul 3 15:31:22 x4 kernel: power level 0 sclk: 50000 vddc_index: 1 Jul 3 15:31:22 x4 kernel: power level 1 sclk: 50000 vddc_index: 1 Jul 3 15:31:22 x4 kernel: status: Jul 3 15:31:22 x4 kernel: switching from power state: Jul 3 15:31:22 x4 kernel: ui class: none Jul 3 15:31:22 x4 kernel: internal class: boot Jul 3 15:31:22 x4 kernel: caps: video Jul 3 15:31:22 x4 kernel: uvd vclk: 0 dclk: 0 Jul 3 15:31:22 x4 kernel: power level 0 sclk: 50000 vddc_index: 2 Jul 3 15:31:22 x4 kernel: power level 1 sclk: 50000 vddc_index: 2 Jul 3 15:31:22 x4 kernel: status: c b Jul 3 15:31:22 x4 kernel: switching to power state: Jul 3 15:31:22 x4 kernel: ui class: performance Jul 3 15:31:22 x4 kernel: internal class: none Jul 3 15:31:22 x4 kernel: caps: video Jul 3 15:31:22 x4 kernel: uvd vclk: 0 dclk: 0 Jul 3 15:31:22 x4 kernel: power level 0 sclk: 50000 vddc_index: 1 Jul 3 15:31:22 x4 kernel: power level 1 sclk: 70000 vddc_index: 2 Jul 3 15:31:22 x4 kernel: status: r Jul 3 15:31:22 x4 kernel: [drm] radeon: dpm initialized -- You are receiving this mail because: You are the assignee for the bug.

1 4

← Newer
1
...
73
74
75
76
77
78
79
...
85
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

dri-devel July 2013